Viewing all customer Discussions for:

Door & Window

I have a sliding screen door with rollers that need replacement. They appear to be your number 84-096. Is this available with either a stainless steel roller or a nylon roller? I live on the ocean and the steel rollers are badly corroded. Thank you for your help.

I need a spring for the following window sizes. the markings on the window hardware bare the name "Certain Teed" 26 x 39 1/2 36 1/2 x 37 33 x 39 1/2 Thank you

screen framing is 5/16 x 3/4

These are grid retainers from what I was told were wood Atrium windows. Trouble being Atrium doesn't make wood windows so I'm stuck.

My Malta windows can not stay open. I think for some windows the pivot shoe is broken and I can get 15-159 as replacement.But some breaks at top. Is the part called pivot top? What can I get for replacement?

alum frame corner

Hello, I need to replace several crank mechanisms for windows made by Permanent window company. If you have them can you tell me if there's a way to remove the old ones without removing the wood? Perhaps a special tool? Thank you, Connie

The string in my window broke and I need a replacement. Thanks

Need to buy replacement for 30470 LH crank

It is the same measurement 1" x 13/32" Acorn Door Corner Roller Assembly, 1" Wheel however there are so many do i have the right one?

I would like to replace this wheel assembly. Do the wheels straddle a track or do they ride completely within a track? Thanks for your response. Mary

I googled the model of my screen door and found this site. After browsing the hardware area I found your 82-243 Just want to make sure that the picture I uploaded is in fact the item linked above. It looks like it is.

Hello, I have this window balance from an Empire Pacific EPI window that is about 12 years old. Please advise on what to order & I will happily purchase from you guys. Thanks! Devin

My home was built in the early 1980's with 20 Alenco windows of different sizes & shapes. All have problems with the channel balances. My first repair project is missing a channel balance. The remaining one does not have any block & tackle. 28" length,

I have a 40 year old house with sliding patio doors. I am trying to find replacement rollers (pictures attached). The roller casing is 3 inches long, 1/2 inch wide and the roller is 1 1/8 dia. The doors do not indicate the manufacturer. Thank you in advance for your help.

I am looking to purchase 2 LH and 2 RH casement window mechanisms. Would you let me know if you have these available and their cost? Thank you 15035 MADE IN U.S.A. U.S. PAT. 4505601 PAT. CANADA 1986 U.K. PAT. 2135397

Hi, We have a window operator that needs replacing - the gears are striped. It is for an Anderson window - probably around 1980 It opens from the bottom and has hinge arms along the left and right side. Any idea whether you have a part that would replace this? it doesn't need to be an exa ... (cont.)

This window was installed about 24 years ago. The metal portion of the balance is 30" long. The marking is 2920Y. I will need one for each side of the window.

The picture shows the plastic corner reinforcement for my Pella screen door. I need 2 of them. I have talked to Pella and the do not sell them but offered a new screen door for around $600. I turned down the door. Can you help? I can work with something bigger and cut it down. Solid UHMW pl ... (cont.)

I have been going thought your website trying to find the roller that could fit my windows. I think your Merzon Sliding Window Roller, 3/8" Concave Wheels (Product Code: 87-180) is the one. However, I cannot see the holes for the screw to secure the housing to the window frame. I ... (cont.)