Viewing all customer Discussions for:

Door & Window

# on balance is 2730 and a backwards/upside down letter K. Also perpendicular to the 2730 # is the # B.S.I(letter I)as best as I can make out. Thanks in advance for your help.

I am in need of a matching wheel housing or one that would be able to replace this one if possible, please.

Stamped: 14 2 HW CMC 7 Metal part measures 15 inches

Have brocken window locks that need to be replaced, please see attached picture. I've also pulled various numbers to help with identification if helpful: P.L. #352-006 SERIES: 3150 casement. I also need help of how do you take apart from the window. Thank you very much, if possible please reply A ... (cont.)

Pleased as can be that I just found your site, and it appears to have just about exactly what I need. One question on this 87-091 part: is it, or was it once made with a countersink on the side opposite the slot? That's the only thing that appears to be different from the mostly broken pie ... (cont.)

1/2 diameter Barrel length is 26 inches Thanks Duke

Dear sir or madam, I am repairing a stormdoor for a charitable project at a home in need of repair. The storm door is off its hinges inside of the home, and it appears that all 3 hinge pins (corresponding to the 3 hinges that the door has) that hold the door to the frame are missing. The image that ... (cont.)

Attached are a few pictures of the window channel balance that I'm trying to order to replace. Please let me know what is the correct replacement part number. I also need the take out clips too. The number that is stamped on the channel balance is 214088067. It appears there is a symbo ... (cont.)

House built in 1978. Operator is very similar to 39-054. It appears that the dimensions for the fasteners that attach to the window frame are the same, but the arm extension is not. Arm extension is 3/4" wide and measures 2 13/16" +/- center to center. The offset is at the other end from the o ... (cont.)

How do you remove a window from its balance? I need to get out on the flat roof to do some repairs. I have one window that is off the balance on the left side.. How do you get it back in place?

This is the 2nd window. I have attached 3 images of my window crank assembly and am hoping you can assist with identifying exactly what I need and the price. The window hinges are on the left looking out the window. The arm attaching to the crank is 9.5". I will also need a couple of cranks ... (cont.)

I have attached 4 images of my window crank assembly and am hoping you can assist with identifying exactly what I need and the price. The window hinges are on the left looking out the window. The arm attaching to the crank is 5". The other leg is 3.5". Andersen Windowalls

Good morning! I need help! I have older storm windows and the plastic or nylon tabs or clips that hold the windows in the channels are breaking. I found you on the internet and it looks like you've got all kinds of window parts but I couldn't locate the part I think I need. Attached are 2 photos ... (cont.)

i need the window balancers for pgt window about 10 yrs. old. thenumbers ob balancer are 17 9 26# j0 caldwell, the matal piece measures 18 inchs long about 1/2 inch wide and about 9/16 deep the top plastic has 1/8 inch ear on both sides. thank you tony b.

Will we be able to replace these on some windows that we have without much else? I mean, do we need to purchase additional screws or anything?

I purchased a home last year that has prism windows. The tilt latch on the right side of the picture window broke. How do i measure it without taking it out of the window? Is there a store in my area that sells them and do you have any idea how much? Please advise. Thank you. Mr. Steve ... (cont.)

Could you help me locate this part for my window. The coil broke and I can't find it any where. There is no name on the windows. The part that attaches to this holds the window in place. I have searched the coil and can't locate the # for the coil. This is a double hung window. PAT. 5,353,548 ... (cont.)

Hello, I've included a profile image with measurements. The door trim has a channel that accommodate the seal. The color is bronze but I think dark brown or black would be ok. I would need about 30 feet: there are three 80" doors and one 96" door that have this seal. The seal is a rubber l ... (cont.)

I need a balance for a Silver Line single hung window. The balance is marked 26.9 It's a block and tackle type. The metal is 27" long. Dennis

Please see the attached photo of the label from the window, as well as the broken spring. The stamping on the spring is very warn, but I can read the following: 5" P ...32208 #4.0 35" On the square plastic fitting with metal insert, I see "PAT. NO. 5,704,165" I would like to order some ... (cont.)