Viewing all customer Discussions for:

Door & Window

Screw holes are set back 7/16ths inch and distance between center of holes is 2&1/16th inches. Michael

I need the interior lock set for - a Surface Mount Handle Set, 6-9/16" Product Code: 82-036 - I have the handle - but the inside lock set -a nd the outside lever to set the lock/latch - are missing - are they sold seperately? - or do I ahve to buty a whole surface mount handle etc too? ... (cont.)

I need to replace Anderson split arm window operator 1361316 and 1361318. Is this your 39-147? I also need the crank handles. Is there a style that folds back rather than sticking straight out of the window? How much would it be for both right and left operators and handles?

I need help finding a replacement balance. The number I have is D78 7#27 4-87. Can you help direct me to the correct one. thanks!

I can find no markings to ID the type of window or parts... House is 20 years old (1993) and these are Tilt Windows.

I was looking for a non-tilt, single hung, side loaded channel balance replacements for my Silver Line windows, most likely installed around the mid to late 80's. I browsed your web site pretty well, and can not find the exact match of the complete channel balance sets that I currently have ins ... (cont.)

I'm looking for a replacement lever for the lock in the pictures. Thank you Sandy

Hello, I have removed a Anderson balancer from my double hung window. I am unable to match a part number with your web sight. I don't have a ditgal image to send you. The window is from 1976 and the number on the balancer is as follows exactly.....H3 612 31 076. the size of the balancer is 6 1/4 ... (cont.)

This is an upper roller off a screen door It is a one sided mount, threaded brass center approx 1" dia., 1/4" width can't find it anywhere, can I retro fit another if unavailable? Thank You, Sam

I need a replacement crank operator for Jeld Wen window serial # c1409623040784 Window also has a number on it: CW 00-5 1-09 20E On the operator it has: 32010 THANKS!! robert

Will pivot bar 26-241 and pivot shoe 15-135 work together?

how is the proper way to install pivot? do you leave the screw loss so that it lines up with the spring holes or do I put a spacer under the screw. thank you

Hi, I have a parts question: I am looking for the Following Parts for my Patio Sliding Door Can you help? DNS Industries 12 Inside Pull 1400 Series 6 of Each, in a chrome finish DNS Industries 11 Outside Pull 1400 Series 6 of Each, in a chrome finish Thank you, Mike

I have a sash balance with nos. 11600-17 and W10 823-2-88 stamped on it . What is your corresponding replacement no. ? The window is approx. 36" high x 31" wide as part of a Bay window . Thank you ! Steve

Part needed: Caldwell 29 - 3 - FQ 30"

will the 3/4" x 7/16" outside screen frame corner key (95-229) fit an andersen screen? these are the same dimensions as my screen, just tne appearance is slightly different: my corner key is a hollowed out square at the corner, instead of filled in solid. please let me know if this part will f ... (cont.)

Having problem finding the right part. My sash measurements are height 34 inches x width 28.5 inches. It is double pane glass that tilts. The weight of the sash is 28.5 lbs (weighted on a floor scale). According to your formula my sash weights 21.87lbs and the coil balance should be 11 (a 5lb an ... (cont.)

I'm looking for block & tackle replacement, the whole piece. The markings found on the existing part is : 23 5 Caldwell BM . The second piece marked: 23 4 Caldwell CM . Both have the same length: 24 inches long . I need two pieces total. Please quote me the price, too. Thanks. kc94030 ... (cont.)

I have a house built in the '60's with inexpensive aluminum single hung, non-pivoting windows. Most will not stay open due to broken spring balances. Can you guys identify a replacement balance for the one in the example photo? It's 3/8" diameter, 28-1/2" tube length.

Good Afternoon, I am trying to locate the attached sliding screen door lock/pull. It has one screw and clips into the side of the frame. There is a slide lock on the inside Any help would be appreciated Paul