Viewing all customer Discussions for:

Door & Window

Attached are some photos of window tilt latches that I need to replace. I hope you can identify these as there is no branding on the windows. Let me know if you have them and the cost. Also if I need any specific tool to replace them. Thanks! Alan

It looks like part # 26-119 and 26-234 Although you don't provide the measurements for #26-234 between the prongs. All the measurements match mine except the distance between the prongs on my part is 3/8" and your part measures 1/2" between prongs. It may not make a difference. I am repairing Emp ... (cont.)

I am looking for a replacement handle for the mortise lock i have in my IWC glass sliding door. I have contacted the manufacturer and they cannot supply me with one. The serial number on the door is 170ct2001 10. I have pictures I can send too. The lock has 4-15/16 in hole spacing and the mortise l ... (cont.)

the top pullies cracked on my milestone 2000 series single hung windows. ( Florida extruders intl in sanford fl were original mfgers of window..now out of business If you do not have specific part the channels pieces are 18 inches long and 1/2 wide. need parts for 8 windows 16 pcs in all) ... (cont.)

Hey guys just wondering if this base fits 39-091/39-092 casement operator, i am looking for face mounted roto

I purchased 2 of these storm doors in May 2010. On one of those doors the inside handle broke off in a few pieces. So I took it off and need a new one but not sure which one to order and very surprised that is just broke? Please advise if I can get a replacement. Thank You.

I wish to purchase replacement balances and top sash guides for my Alcan non-tilt windows installed late 1980s. See pictures included. I need help identifying proper replacement parts. Alcan numbers on existing balances are: 1710W, 1710E, 2910W 30", and 2930W (all 1/2"). I'm guessing Product C ... (cont.)

i'm installing spiral balances, Series 500, for wooden non tilt windows. the double hung windows have never been fully installed with hardware.... I am purchasing the 17-012 bracket for the lower sashes. Do i use the same bracket for the top window sashes as well?

Are special tools needed to remove and replace the shoe 15-104. I don't want to damage the window as they are 20 plus years old yet in good shape.

I just bought a house built in 1986 and it appears to have Caradco Windows in it. They are in desperate need of repair. They are the Horizontal Sliding type and the only identifying information I have found on the inside sash is the marking "PPG 629 86 - 1". I think I need several wheel ... (cont.)

we have LP windows (American Seal) they were purchased approx 14 years ago and one of the crank assemblies is broken. the worm gear just spins out of the housing when you try to close the window. it appears as though the housing is stripped out where the keeper bushing screws in on top of the worm g ... (cont.)

I have reviewed your non-tilt window balances in shop items. I believe the ones I will be ordering for replacement will be # 380 in 27"; BUT, I have questions. First: the channel on the ones being removed measures 1/2" x 27 1/5" long. Does that equate to the 27" length? Second: the only number ... (cont.)

the stamp on my balance reads 29 6 LW CMC 7. its 1/2 inch 30" the s351 30 series. But I don't know what to order based on the balance stamp. please advise.

Hello, I could use help on finding and installing a broken latch on this older door. It looks as though the mortise lock is recessed enough within the vinyl trim it may be difficult to get out. Can you help? Thanks!

Having difficulty finding right sash guide. Closest to match (bottom hole used to attach to window) is 18-127. Just not sure if this will work. Also, is there a metal version? Pics attached. Thanks for any assistance.

Hello, my window has the pivot pins broken off so I do not have a sample to help me order replacements. I did take a picture of the slot the pin fits into and wanted to know if you can help me identify the proper pivot pin on this no-name window.

Hello! I purchased a home that had been foreclosed. Hud came in and secured everything, but never provided me with any of the keys for the locks once the sale closed. A roofing friend used his grinder to take the padlocks off (the shed, garage door, etc.) but they had never replaced the handle, ... (cont.)

hi please have a look at the pic i have sent you and can you please tell me if you stock this part or something that will fit, regards

Is 70-072 available in black?

Existing Marking: 36-4 AA CMC 11 Per your website the end pieces appear be 19-005 top (winged) and 15-002 Foot (not winged)(which has the dimension of 1 3/32" Length is 37". None of the web identifiers show those two parts together on a balance. Thus my confusion. Can you verify what the ... (cont.)