Viewing all customer Discussions for:

Door & Window

I have a number of 1/2-inch channel balances that need to be replaced. The markings are "32 3 FT CMC 2". What do I need to order to replace it? I included photos of the OEM channel balance, although I have used a 3130 in the past that I was able to locate locally. Thank you, Mike ... (cont.)

I seen your post on this patent number, but as you can see from the attached pictures I do not have a tab. Over all length is 2.289", higth is 1.375" not including tab or roller, width by screw and tab is .710, tab higth is prox .767

WHEN WE FIRST HAD THE NEW VINYL WINDOWS INSTALLED 10 YEARS AGO WE COULD OPEN AND CLOSE THEM WITH TWO FINGERS, NOW YOU HAVE TO USE BOTH HANDS AND REALY PUSH HARD TO OPEN AND SHUT THEM. IS THERE A SPRAY OR SOMETHING THAT I CAN DO TO MAKE THEM WORK LIKE THEY DID YEARS AGO? THE TOP WINDOWS ARE ALMOST IM ... (cont.)

What is the length of the pin-and-cap assembly?

Hello, I cancelled an order for the Series 380 because I think I chose the incorrect shoes. Based on your part pictures, I could tell my parts looked close to 19-005 tops and 15-095 shoes. I attached some pictures here hoping you could help to identify them. I would like to reorder for 4 each ... (cont.)

I am trying to find a replacement for the following channel balance. The rail is 26" long, 1/2" wide, and is stamped: 25 4 KP Caldwell. Images of the rail and shoes are attached. It is out of a Phillips vinyl window in a modular home. Thanks!

The parts has this markings: 20-4 EH5 CMC 75 The length is 21" from begin to end of the metal piece. Thanks.

I am attaching a pic of the lock we need to replace. The dimensions of our lock appear to be the same as your product code 82-243. If possible please confirm that your product 82-243 appears to be the same as the one in the pic attached. Thank you Murry

I have been replacing my screen rollers with rollers similar to 84-028, but I have been having trouble with the plastic holding the spring adjusting screw stripping. The plastic body of the roller is not enough to hold the weight of the screen. Are the 84-075 rollers in metal the same thing? Will th ... (cont.)

I'm in need of a replacement part for a window - I believe it is called a balance shoe or pivot shoe. Unfortunately I see no markings on this part (nor the window itself, not even a manufacturer or brand!). A portion of a label remains on the window that reads: Series: 8500 AAMA/NWWDA 101/I.S. 2-9 ... (cont.)

i need a tilt window latch with 2" screw holes and 1" wide

I have taken apart the window to find the part number for a Andersen windows I have and I can't find the replacement part number I need. The part number stamped is D13 7#31 9 80. Can you help me find a replacement part?

I AM LOOKING TO REPLACE THE COUNTER WEIGHT SYSTEM FOR OVER SIZED WOODEN SASH WINDOWS AT MY CHURCH. I HAVE TAKEN ONE WINDOW OUT AND HAVE THE HARDWARE AVAILABLE. I NEED HELP IDENTIFYING THE CORRECT REPLACEMENT PARTS. THANK YOU SCOTT

I am looking for coil replacement parts and the plastic housing for a Simonton double hung window. I believe the numbers on the coil are 405 35" and pat. 5232208. I am attaching a picture of the broken ones. Please help me identify the replacement parts. Best regards, Ralf

I just had installed 72" 4-panel bi-fold doors and 60" 4-panel bi-fold doors. Both are from Jeld-Wen. The hardware that came with the 60" is labeled "Johnson" and the top pivot bracket is "Johnson 1810 pivot socket" and looks like Product Code 23-307 on your website. The hardware that came with t ... (cont.)

Thanks for posting! Yes, a 29" tube translates to a 29" long spiral balance in our catalog. Now, as you can see, the S900-29 has two tip color options: Red and Green. The Red Tip can carry a window sash weight range of 10 through 22 pounds, while the Green Tip can carry 14 through 26 pounds. Does ... (cont.)

Hello Paul, The windows in my home were manufactured by Superior Windows in Ontario, California. I have several single hung, dual glazed aluminum windows with the following numbers stamped on the balance: 23 4 JT CMC 2 . The sash is 32 X 36 dual glazed (heavy). Can you help identify the top and ... (cont.)

I see you have the latch handles on your website, but I was wondering if you can get the locking mechansim itself? The Handle is part # 39-291 Thank You, Aaron

looking for 1/2" Wide Channel Balances with # 19-008 on top and #15-025 for the shoe