Viewing all customer Discussions for:

Door & Window

My window balance has the following stamped on it: 26 4 GT CMC 2 I'm trying to determine what would be the correct replacment part. Thanks.

1window stash pivot

These are 60s or early 70s closet door rollers. One in each end of a 30ish pound mirrored closet door. Rollers are riveted so I am looking for the whole assembly. Label on nylon roller says "Killian" Syracuse NY Toronto Canada

I have two windows that can be opened from the bottom or the top, pretty sure that's called double hung, but correct me if I'm wrong. So I am replacing a total of 4 window balances. The balance is 26in long and 1/5in wide. Looking at these pictures, which balance would be a suitable replacement that ... (cont.)

I have 11600-17. But on the tap where it was stapled in my number is. 931. R82. 4/82 What would be the correct replacement balance please

These are from builder grade windows installed when our home was built in 2007. MI windows was the window company I believe.

Needing these track parts for window and gasket as well please. Thank you.

Markings: 1440

House was 4 yrs old when we bought thus 1988 built. The Sill is wood but might have thin plastic cap full width however I can not remove screws that hold the handle mechinizum under sill, 4 -6 screws. Thinking about removing ~ 1/4 inch thick piece of sill above mechinizum so as to access srew heads, ... (cont.)

Length 23 inches width 1/2 inch

Client ordered a Visions 2000 white 6-0x6-8 sliding patio door from us in 2002. Hardware has since broken. Looking to identify and replace if possible.

Need to order this part.

Hello, I have a broken coil spring I need to replace but I also need a stronger spring than the original because I had the window panes replaced and the new glass is thicker than the old. Im not sure how much the old sashes wieghed but the heaviest of the new ones are 25lbs. If I'm reading the numbe ... (cont.)

I just talked to a wonderful lady and she asked me to submit pictures. I need replacement balance shoes. Original manufacturer was Patriot windows. Part Number R-SO-3888020-3. There is another number "253098". I received some of these from plygem (who I guess purchased Patriot when the windows were ... (cont.)

House was built 2000. I don't know who the maker of the windows are Possibly Lincoln

Please help us identify what we need. For numerous windows all taking the same parts.

I am looking for this part on a pella 77 inch door, see diagram.It runs top to bottom, about 77 inches and it screws on to the door.

Wondering if you have this sash guide? I need 2 if you do. Its 2 inches long by one half wide and made of a hard plastic. Its not very thick.

Please let me know which model to choose. This is for a window sash that weighs about 34.6 lbs. The length of the window balance is 27". The pictures provided show the type of the plastic fittings.

I had to find someone with a camera so I could show you what I'm running into and ask for your help. Attached is one of the 3 handles installed that I need to replace. The inner handle is fine but the outer (keyed) plastic is chipping away from the sun and weather on all 3 handles. By looking at ... (cont.)