Viewing all customer Discussions for:

Other

9880 made in brazil ; desmoines iowa on side mortise latch and front of mortise block ---EMCO,madein brazil on keys. Brass clips holding glass to frame say EMCO Demoines, Iowa I thought it was a Larson (30-40 yrs old) IF I HAVE SCREWED UP I WOULD LIKE TO CANCEL MY ORDER AND ORDER SOMETHING CORRECT.. ... (cont.)

Hi I'm looking to replace my bottom track but I don't see the length I need. Do you do custom lengths? Or know where I could obtain the length I need? The existing track is mangled and doesnt slide well anymore. It measures 95" in length.

Been having trouble with my patio door and door handle the last couple of years. Old door with a worn track, so the handle took a lot of beating. Started coming loose and the screws are separating from the opposite handle. Time for a replacement and the hardware stores don't seem to have what I need ... (cont.)

I've got and old sliding glass door with hardware no one seems to know how to fix. No video or pics to reference online. I'll send you mine.two separate companies have stopped by with no avail. Please help. Thank you Jeremy

Hello,I have a certainteed casement window originally installed in my house 2004. I recently finished my basement and the inspector says this window doesn't meet bedroom egress as the opening is only 15.25 inches. Do you sell any hardware that would move the casement panel pivot point? Moving the ... (cont.)

Need 4 pivot shoes, which are 27/32" wide and attach to the double springs with a screw. Top date 8/07/09 2CDrkBzM Top 2n HS SM@8Bar Code 05674099010002 wm 00 i7 55DHWI39.563X24.50050344 ss Bottom date 8/07/09 2CDrkBzM Bottom 2n HS SM@8Bar Code 056740990100

We have several indoor bedroom closet doors that have broken wheels I need to replace them These are from 1997

This is the cabinet side of the 2 part 270 deg Mepla hinge

I have 9 double hung windows measuring at 27 1/2 x 21 1/2. Looking for bottom rubber seal and side felt seals. Appreciate the help, thanks. These windows are mastic windows as well. From around 2005. Have couple more pics. Looks like 1/2 inch from bottom of seal. Seal looks flat though not roun ... (cont.)

Rotten wood on portions of the sash. Is there a replacement milled part?

I need 6 soft close dampers. Photo attached. Gray damper part is about 3.25 inches in length.

1991 double hung window. bottom mount square bar two screws. one screw on sloped surface. looks similar to anderson sash pivot

Hello, This particular window doesn't lock like my other swing windows do. It only cranks closed. The part that attaches to the window frame for the hook to tighten is not there. One photo shows where it should be and that one has never been installed there either. My question is this lock broken or ... (cont.)

Hello. On 2/18 I purchased from you (8) Legacy Handlesets (Item 82-089) in black to replace what I thought was the same handlesets i have in brass on Loewen sliders. As you can see from the photo, they are almost exactly the same but sadly the placement of the locking pin does NOT align. Can you hel ... (cont.)

I have been trying to locate this specific piece of weatherstripping and have had no luck. I am sure hoping your able to assist. Thanks in advance, Ed

I have a broken pivot bar in an approximately 2006 simonton double hung window (hurricane glass) for Tampa Florida. The installer is no longer in business. Do you have a suggestion for what type of pivot bar to purchase?

Dear Swisco, I need to replace both balances on a plastic frame double pane glass window that weighs 13 lbs. The window frame measure 33" wide and 22&12" high The metal part of the balances are 19 & 1/2" long by & 1/2" wide and and 5/8" deep. Marking on the left balance(looking out) is 1 ... (cont.)

I have attached pictures of a pair of window balance I need to replace. Please help me with identifying and purchasing new ones. U shape is 5/8 x 9/16 x 5/8 and 28" long. Sash weight is 19 lbs. There are no markings on balances. House was built 2002 Melbourne Beach FL

This is off of a Hibriten china hutch. It is the pull for the doors. The number on the back of the pull is BS80776

A client asked me to locate new rollers for PGT sliding glass door screen panels. Sending pictures of door edges with info and pic of a mutilated roller removed from screen. ANY information is greatly appreciated!