Viewing all customer Discussions for:

39-099 Andersen Awning Operator

I'm looking for an Andersen awning operator, part number 1521027. I can't find anything by that part number anymore. Is there another part number that would work?

Looking for this crank - the top hole CL is 2-11/16", the arm is 9" back side of crank body has number: F-9400-8A There is also a number on the arm: 9958-1

I am not looking for the shoe but I need to replace the metal rod that goes through the shoe as it is rusted.

Looking for this replacement part. My windows were installed in 2008

I'm looking to replace the pictured part but am having trouble identifying the replacement. The arm measures 9 1/4 inches from the centre of the attachment point to the tip. On the arm is a number 1521101 and the words "LIFT HERE TO WASH EXTERIOR" followed by an arrow. On the back, there's anothe ... (cont.)

Hello. Andersen window cig-1 --99.6 The number on top of the crank is C-9400-1B The number on the arm is 1521101 The arm is 9". If you look at the top screws closer to window they measure 4.5" screw to screw. Please let me know if you need any more info. Thanks, Amy

Please,help to find this guide. Window is using 39-099 operator. Thank you.

what do I need to repair / replace existing window cranks? - the mounting O.C. is 4.5" - the arm extension (from pivot point) is 9" - the front stamp is C-9400 - the rear stamp is F9400-8A A - the glazing date is: CIG-3 3-97 Also, Is there a replacement for the rail mounted to the window ... (cont.)

Hi, the operator on my window looks like it matches the 39-099, however the item is now out of stock is there any substitute for that?

I see that this is a common practice of the gears stripping???? operator #1521101. These are 1996 and have needed replacing before... I am in need of this operator 1521101... info on ordering THANX T.H.

I need a replacement crank assembly for an Andersen casement window. Right hand window. The gears are stripped. I need just the assembly. I will use the crank, and the assembly cover from the old one. I have numbers off of the original; F-9400-8A B M

One window crank says Anderson. I do not know if it is original or a replacement

Hello. I need to order the correct part. I've read the other threads and I understand the difference is based upon when the window was mfgr. However this house was built in 98 and 99 so I'm not sure which windows we have. From looking at the two pictures, both parts seem identical. The screw ho ... (cont.)

I am in need of a few operators and am not able to find them on your website. I've attached a couple of pics of one of them. The number on the operator is C-9400-1. I am in need of one left hand swing out and 2 right hand swing out. The date on the windows is 1995. Any assistance would be great. ... (cont.)

Hi, I have an Andersen window crank, installed originally during new construction in 2005, that needs to be replaced. The top of the crank is coded with C-9400A-1 A 9 and the bottom is coded with F-9400-8A B, both very visible in the attached photos. The arm is 14" long and has numbers on bo ... (cont.)

Looking for replacement part for Windows

We need to replace two of these. the crank doesn't. work anymore.

I have a number of transom-style windows that open with a thin-body straight arm operator with 9 inches between the cl of the pivots. I need to replace them but am having a difficult time finding new hardware. Help, please!

How much would this part be

I'm looking to replace a couple of operators for Anderson awning type windows. The stamp on the operator is C-9400-1B The number on the arm is 1521101 Do you have the correct replacement operators?