Viewing all customer Discussions for:

39-114L Crank Handle, 11/32"

What parts do I need to replace my Milgard crank assembly?

The mechanism seems broken. When I turn it to the right the mechanism comes out. When I turn it to the left it opens the window.

I am missing 2 handles for casement windows that were installed in 1987.

The top arm is 5" long. The arm from the crank housing is 4" to the pivot point. The clip in the middle slides onto the open end of the top arm. Screw holes for attaching the unit onto the window are 5" on center.

Thanks.

Truth Entry Guard. 30710 near pinion gear. 20544 on two piece arm. 40254 on operator base plate. Window opens on right from inside the house (pivots on left). Please suggest correct replacement.

Arms are 9 inches shaft connecting to window is 4 inches. No markings on unit. Thanks

Hello,For a handle with an 11/32" opening, I would recommend our 39-114L crank handle. Take a look and please let us know if you need anything else.

Trying to repair or replace Andersen window cranks and need part number. Any help is appreciated! Our house was built in the 60s. Not sure if they are original but they are no older than that.

Looking for replacement crank handle

I'm looking to replace both the left and right cranks

Can I purchase it from you?21550. 45251. 3.

I'm looking to replace this operator. The crank out arm measures 9 inches Would you have this in stock and what color options for handle ? Thank you for this service,

window is 20x50". bow window has 4 separate window panes with the outside 2 windows that open and lock. I do not see any markings on these parts. I think I need to replace the crank arm and crank. The arm is 11 inches and I can not take a picture as the window will not open since it is broken. ... (cont.)

Number on the hardware (attached to window frame: 40942 (sitting flat on the frame) Photo 1: Shows the configuration of a crank assembly that is in good condition. Photo 2: Shows the severe corrosion / degradation of the hinge "arms"... about ready to fail. I've tried to look up what Shuco was ... (cont.)

Do you have these parts

Do you carry this Truth Window Hardware? Truth Entry Guard Main bracket has 40471 stamped on it One of the main linkage has 30842R stamped on it

I have windows that are striped out and not working. The handles will just open the window and when trying to close will just unscrew and come off. The look to be 9 1/2 arms only makings i can find is Somco. and a part number on the arm of 30744. Please help

Need split arm operator with pin stud and stud holder

Andersen 0P052020. Need for left and right including the handles. White.