Viewing all customer Discussions for:

39-114L Crank Handle, 11/32"

Hello, I'm hoping to purchase a new trim piece to cover the crank mechanism on my pozzi casement window

Hi, I'm trying to replace the window Operator the bolt's teeth in the second picture has snapped off and is stuck inside the third picture. The brand is by Allied Windows which has run out of business. Please let me know if you have this part. Thanks!

Anderson windows from 05. Looking for the crank hardware and anything else you guys can provide for this style.

Hi, I would like to know if you carry this operator. It is a dual arm. Arms are 9 in. long. It has a screw in retainer plug with two flats. One side of the retainer plug that holds in the threaded shaft is about .622" while the other is about .685". The threaded shaft looks like the shaft/stem f ... (cont.)

Thank you

I have a 1992 Viceroy home that has several casement window hardware issues. I want to ensure i get the right hardware to replace them . Viceroy has no Website , so I am hoping you can help me. See photos above ThanksJohn

Good morning. The window is located in a ocean community home so rusty is an issue. I need left hand and right hand operators, tracks and hinges. Hinges for top and bottom please. It's a bay window that still has the glass sealed. Amy help is appreciated

Dear Sir/Madam, I'd appreciate greatly if you could help me to indentify the parts that I need for the replacement of the crank assmbly for a casement window. The stampings on the assembly members are: "20755", "Entry Gard", Truth, etc. Let me know how I can upload the photos if you need them. Than ... (cont.)

Looking for milgard casement window operators parts number stamped on #40753 on long arm, #31538A on short arm. The subject windows are approximately 25 to 30 years old and The operators were worn out. Please quote, thank you, Tom

Grayco window will allow me to crank out window but not crank it back in. there also appears to be a broken piece of black plastic that keeps window in track seen in image 8993. I think the sticker says k501305-01 grayco 09-3294B then size 27 5/8 by 53 1/4 bar10822 egress. Hard to read sticker ... (cont.)

I have a Windsor crank window. The window does not crank close. I am looking to replace this part in provided pictures that is between the handle and the crank. It looks like a metal washer or "c clamp" is broken. Are you able to provide this part without replacing the entire crank? Thank You! ... (cont.)

The handle as shown in photo fell off the wondow and I cannot find the missing bolt to reattach. Probably the cat rolled it under something. Can you please help with any needed replacement parts?

I can't see a manufacturer name on these windows and I have many that no longer function properly. Hopefully you can identify and have replacement stock. Thanks

I need the 3 pieces in the picture

Hello Swisco, I have a Truth EntryGard operator wheel which is getting bound up on the track holes. The wheel spins freely, but the edge of the wheel is chewed up. I'm guessing the wheel is no longer the correct diameter and that's what's causing it to get bound up. I see the wheel is riveted on t ... (cont.)

see picture. part number stamped 30830

Nothing works. I open and close the window manually. Lincoln windows (supposedly) has #16 on crank arm.

Hello, I am looking to replace our old and nonfunctioning window cranks, but I have now idea which window crank to order. The long arm measures 8" and the shorter arm measures 5 1/2" . The cranks that need replacing operate a window that opens on left. Thank you!

I'd like to order replacement operators but need to get left side open to get measurements. The handle says weather shield but the right hand side slide says it's a Truth. Please advise. Thnx

Thanks in advance for any help you can provide. I will be up there 6/11-6/19 so if you have parts, I can have them sent there and install them when I get there.Geoff (jeff)