Viewing all customer Discussions for:

15-046 Pivot Shoe, 1/2" Thick

This original window pivot says 530C on it. I bought a swisco 15-015 as a replacement, it is very similar and would work except the thickness of the pivot hole is shallower, and my tilt window falls out of it when fully mounted. The original sticks out of the mount a bit compared to the 15-015, whic ... (cont.)

My condo was built in the mid-1980's. The windows are brown aluminum. Other than the photos, I cannot tell you much else about them. Can you help me identify which of your inventory I need to order as replacements? Thank you P.S. I have weighed my windows & will be ordering spiral balances from ... (cont.)

Please help me identify the broken spring balance pivot shoe. Thank you

My current pivot shoe height is 2.25" and .5" thick and withid is 1.25" and my question is which one of yours would fit with mine.

IMG_2467 shows intact pivot shoe and IMG_2466 shows broken shoe that I want to replace. Measurements of the shoe are: 1.259" wide, 2.047" tall, 0.551" deep. The metal pivot on the sash measures 0.307" wide and 0.187" tall. IMG_2463 shows the sash stop at the bottom of the track that keeps the sa ... (cont.)

Here is a picture of my existing pivot shoes and surface mount latches. Can you help me identify replacements? Thank you!

Hello, 1. I need lock/unlock type shoes for single hung vinyl windows. The shoe is 1 and 3/16 inch wide. It is 1/2 inch deep. I don't know the malefactor, but may be Glen-Wen. I suspect they were purchased from Lowe's or Home Depot. The flat metal that covers the coil spring and pulleys is 28 ... (cont.)

I HAVEN'T REMOVED THE BROKEN PIECE BUT THE GOOD ONE MESSURES 2" HIGH 1/2" DEEP AND THE WITH IS 1 X 1/8 WIDE. I HOPE I DID THIS RIGHT.

I have about 8 windows in my house that will not stay up. I think the shoes are completely missing or broken. I recently moved away and live about 5 hours from my house (I'm prepping to rent it out in the near future). So unfortunately I don't have access to take the shoes out and provide more pict ... (cont.)

I have Patriot windows and need pivot lock shoes. Please tell me if you have a match for the ones in the pictures. They are about 2" high, about 1 1/4" wide and 1/2" or 9/16" deep.

I need the above for about 11 windows. I also need spiral balances. The windows were made by Patriot, I think from Philly. They were installed in a home built by Hovnanian. I've attached a picture of both the laft and right side. The track they ride in measures 9/16" to the outside so I would e ... (cont.)

There is no numbers or no name that I could see

The balances I think I need to replace are 29" in length (tube only) and 3/8" in diameter. It appears they have black tips. The windows weigh about 26 pounds. Would like your advice on what replacements I need.

shoe measures 1 1/4 wide at top--2" tall---9/16" thick--- socket measures---3/8 wide---1/4" tall (opening)

First off thank you very much for providing this service of helping people identity window parts. Both this site and your youtube videos have helped me gain an understanding about all this. I have recently bough a house and unfortunately some windows have an issue with the pivot bars and locks s ... (cont.)

I purchased 26-369 but it is the wrong size. Original part is longer and has 3 holes equally spaced. Also has number 6240 stamped on it. Length is 3 1/8 inch. First hole is 1 5/8 inches from u shaped tip. 2nd hole used is 1 1/4 inch from 1st hole (middle hole not used). All other dimensions on the o ... (cont.)

Is replacing a pivot shoe in an aluminum frame the same procedure as your cut out video showing a vinyl frame pivot shoe replacement? My aluminum frames already have a cut out on one side in every frame. My concern is removing and replacing the shoe itself using the screw driver as shown in the vid ... (cont.)

Can please help me identify the correct replacement for this pivot shoe? Note the screw. The dimensions are approx 2 in x.75 in x.5 in. Measurements are approximate because part is still installed. No observable cut outs. If you need the part removed and then measured to correctly identify, please l ... (cont.)

Hi, I am looking for the replacement parts of my ALCOA windows which were installed in 1996. There are a couple problems with those windows. The white cases of the spiral balances are broken into pieces. So windows are hard to open. One window can not stay open. Some tilt latches are gone. ... (cont.)

Hi, I called your customer care office this afternoon about my windows missing pivot pin issue. Here is the background of my window. I moved in to my current house about 15 years ago. The manufacture of my window is Silver Lining. The windows are covered by 25 years warranty. But couple weeks ... (cont.)