Viewing all customer Discussions for:

39-140 Dual Arm Crank, 16"

Your #39-140 operator appears very similar to the #30895A that I'm replacing, except for the mounting. The one that I'm replacing mounts vertically thru the inside of the window frame directly into the operator. The center to center on the mounting holes of the operator is 7", whereas yours mounts d ... (cont.)

Hi, I am looking for the part pictured - it has the handle that twists to open the window, everything else about the window works. The window is Truth brand. Thank you very much! Laura kozien

Crank worm gear broken

The entire workings inside the crank are broken. I can't buy just a new crank. The mechanism inside just pulls in and out, but won't come out, and spins round and round. I can't see any way to remove the base around the whole thing from the window frame to get to it that way. Any help would be ... (cont.)

Hi,My awning window operator no longer works. I have tried to repair it with no luck but I am not an expert. I need to confirm what replacement part or parts I need. Thanks for your help.Kathy

Here is the number on the crank handle: 45012. It's the only identifying number I can find.Hi!I have eight awning type windows in my bedroom that are at least 20 years old. One of the windows has a stripped crank. I noticed this a few months ago, and I was able to shut the window from the outside, a ... (cont.)

This is for a bathroom window that raise up and lowers down. All metal us patent 4505601 Part no? 45142 on base, 30895a on brass arms 40510 and 40511 onbrass arms closest to mechanism

Can you please help identify what replacement part I need to order for this? The window is approximately 20.5" across. When I turn the handle it does not open or close the window, so I believe the piece must be stripped. Thank you!

I have watched the video for the Swisco 39-140 Dual Arm Crank Operator. I am looking to compare the 39-083, 39-140 and 39-143 to what I need. However, I don't understand what the description means regarding length. Using the picture online for each of these parts, are you defining the length as t ... (cont.)

I have these crank handle windows where the crank mechanism is broken as the collar for the crank (pic 8) does not hold in position as the thread looks damaged. So, when you crank the handle it juts pulls out the rotating threaded shaft. Is it possible to repair or replace the whole mechanism? I h ... (cont.)

I need a replacement awning operator. Casting number is 45142, and according to my customer the measurements from the mounting base to the fully extended arms is 12 3/4". I believe he means from where the arms reach through the PVC window.

I have two broken operators on a large casement window. The left and right windows are identical, both crank from the middle and open up awning-style. The color of the crank is bronze I believe. The cranks are from Truth and the number on the crank is 45206. The right arm is stamped 31110 on the ... (cont.)

On the back of the crank it says Truth 45206. I need the handle, too.

trying to find a replacement operator for this great lakes window, do not see any part numbers

Has the number 40245 made in USA. Thanks.

Dear Swisco: The crank handle on my garden window has stripped out of the housing and won't function any longer. I want to replace the whole unit, however, I have been unable to find the make/model number of the window/crank and where the screws are to remove it. I have attached 3 photos to s ... (cont.)

I SENT AN EMAIL WITH THE SAME INFO TO YOUR CUSTOMER CARE DEPT. THEN i SAW THIS SO YOU MAY GET DUPLICATE QUESTIONS. THE THREADS THAT HOLD THE BUSHING WHERE THE HANDLE GOES IN ARE STIPPED. STRIPPED ON THE CASING NOT THE BUSHING, MAYBE THE BUSHING IS WORN TOO.

Not sure what the make/model of the window is, however we lost the hardware that sits in the window groove thats connected to the crank handle. Normal crank at Home Depot works for other windows that have this hardware. A couple of windows are missing this hardware. Please help. Kumar ... (cont.)

Handle has a part #45012. The locking screw threads are stripped. Also, how do you get the mechanism out of the window frame, as I don't see any screws from either side.

Hello, I've got some cranks 39-140 mod. that need a new coat of paint on the retractable arms,like your item photos ( silver - grayish ). Is there a way to get a color name or a can of spray paint to bring these back to factory shape? Thanx : ]