Viewing all customer Discussions for:

39-188 Sash Dyad Crank, 5"

Hello, I'm looking to replace the closing mechanism of both of my casement windows. The screw socket on the left one is broken and the right one is pretty rusty and hard to close. I'm a new home owner and don't really know what I'm looking at. The only markings I could find were "Truth, made in USA" ... (cont.)

I am looking fo a replacement Truth casement window operator LH & RH for the model in the attached photo. I can't find the model number only the manufacturers name. The only thing wrong with the operator is the cast covers have broken or cracked. Can I purchase the castings alone or do I need to p ... (cont.)

Can you please check if you have such metal plate for screwing the operator?

Very old Simonton windows.Some of the cranks are on the left side.Picture uploaded is on the right side.Bright brass if not white will work all windows are white.Window cranks 5-1/2" x 5/8" tall 1" with screw hole mount on bottomCrank Handles 3" longTie bar 38-7/8" has 3 interlock rollerLocks 4" tal ... (cont.)

Need to replace what I believe is called a split arm on my bathroom window.

Hello I need 3 of these window cranks the whole crank would be good.

Looking for replacement of split arm operator. Outer arm is 4 1/2" long and inner arm is about 3 1/4". Been scouring the internet for replacement. Shortest outer bar that I've seen is 4 5/8". Would that work? Also looking for hinge replacement as well. 12 1/8" long 3/4" wide with 10" arm.Attached ... (cont.)

Closer is u.s patent 4,674,777 Crank is u.s patent 4505601 & UK patent 2135397

TRUTH. 30818 Would like to replace this hinge on several identical windows.

Looking for replacement of Truth window operator. Left arm operator, the straight is 5 inches.

Casement window bottom hinge mechanism is broken off sliding pivot point. Upper is ok. Need help identifying. Did not see any numbers.

The connecting arm on left is only 5 inches long the one you sent me is 9 in long

Hi I need to replace a casement window crank, the window opens to the left, pictured are one of my existing windows with the hardware installed for your reference, the other is the window with the missing hardware, let me know if you need additional pictures

Looking to replace mechanisms on casement window. NAMI. NFRC 100. Series CL case.

I just need 2 of these 4 7/8 bars with the rivets to attach them. I bought two new crank assemblies but they came with 5 inch bars so window will not close entirely. Can I just get the 4 7/8 bars and rivets?

Does this come with the hardware to install, such as clips, screws, and gaskets or do they have to be purchased separately

I have a crank window. Unfortunately, I do not know the brand. The photo I've included shows the crank and all hardware. Once I crank the window open, the screw jumps off of the track and I am unable to close it all the way from the inside. I have to have someone to push it in from the back. The num ... (cont.)

The arm that slides in the Chanel has the number 31272

Could you please let me know if you have something like this?

I'm looking for 4 of these in white