Viewing all customer Discussions for:

39-217 Single Arm Window Crank

I've read other posts that when the worm gear comes out you can't replace it. That's what happened. so I would have to install a new operator. Is there one available that would work on this old window? The arm that extends out is approximately 10" long. Let me know if a better photo is needed. ... (cont.)

Casement window operator is broken. "Truth" stamped on operator arm, approximately 9.5" operator arm. Visible numbers inside operator are 45108, and pat# 4-840,075. Window is 16" wide and only opens about 45 degrees before the window frame hits the operator arm (see picture #2). Is there another ope ... (cont.)

Trying to locate truth 45108 or 4.480.075 Crank gear for window. I will include picture. Also need the cover and crank arm

I need to replace this whole mechanism, Truth with a 9" crank armThanksChris

Window crank comes out. But doesn't close the window.

Looking to replace / Please advise

I have a house built in 2004 full of Eagle windows that have Truth brand operators, bar hinges etc. They are all casement windows. Some have the bar hinges at the top and bottom and some are piano hinged with the operator that I have attached a picture of. I ordered the 10" bar hinge set and operato ... (cont.)

From the inside of the house this is on the left side. I'm guess it to be part # 39-217.

won't open or close BiltBest casement window. Contractor will install if I get the equipment. Bob

In the first photo showing a right hand arm, please let me know what the replacement part would be. The following three photos are the left side window. The window is disengaged on the bottom and needs all new parts. Please let me know what parts are necessary. Regarding all these parts, what is a ... (cont.)

I have 3 left and 3 right Windows that will crank out, but not back in. I'm assuming i need new operators. They look like Truth Entryguard Dyad, possibly. I think my handles are fine

We can't find any markings anywhere on these windows and our hunt for paperwork with a brand name of the windows came up empty. All we know is that they are approximately 20 years old. We need one right crank and one left crank - the whole assemblies. It would be wonderful if you could help! Thank ... (cont.)

I found the imprint 40575 on the bottom side of the operator arm, and TRUTH imprinted on the top side. I am looking to replace all hardware on a left hand and a right hand operator. Including all hardware applied to the window itself. Thank you so much for your help!

Need this: Brand is Truth. Part number is 45108 I need two of these parts.

hello. has these numbers on the back us patent 4241541 Can pat 350432 Pat. 1982

Hello! This is a Truth brand piece of hardware.

WS IGCC(R). M100628000340103 31465 3-4

This is a crest line window crank. Right hand. It is older window. I will need both right and left I see the number 40574 stamped on it

I have a customer that has several CRESTLINE casement window crank units that are stripped and not functioning properly. Do you carry Crestline or one that is compatible. Thanks, Dale

Description: Truth in hardware stamp. Casement crank. Need entire mechanism with handle.