Viewing all customer Discussions for:

39-264 Andersen Split Arm Crank

Need part number for the operator shown in the picture.

The crank mechanism is broken on my Andersen window. I am sending you a photo. It looks like the dimension looks correct, but the crank is on the left.

Numbers on the glass are 31-98.6 can you tell me which crank I need?

We have a bay window with a casement window that does not work very well. I'd like to replace it. I do not know the maker of the hardware though or that of the bay window. How would I find out what part to get to replace the operator with? Currently, when cranking the operator, the gears do not ... (cont.)

My daughter just purchased a renovated home that has all Anderson windows. One of the kitchen casement windows has a crank that has the top turn crank stripped, therefore it won't crank open the window. The window, once the latch is pushed up, can be opened by pushing the window out manually. I wou ... (cont.)

I also need replacement crank operator with F-9970A-8 marked on the bottom. AW etched on glass Screw mount holes 2 7/8" center to center (c to c) First swing arm is 2 1/2" c to c Second arm is 6 1/2" c to c Are we all SOL on this or is there a replacement? Pictures above look like mine. Buying a ... (cont.)

Is your product 39-264 to replace Anderson F-9400-3A?If yes, pls confirm the price.Anderson F-9400-8A front and back imagesTHANKS.Best regards, PAUL

I am looking for closing mechanisms for two Anderson Windows coded CXW135 when I bought them in 2007. I have attached a photo of the mechanism in question. There is a part number on the window 0603094 and PROD ID 123-07103-99348.Can you help me?Kyle

Need help with a replacement.

F-9400-8A window,this is the one i need?can i send the other one back?

The knurled peg to which the crank adheres appears to be completely worn. I ordered a new crank handle, and that does not function. Pictures of the crank part are attached. The fact that Anderson does not make the part number easily accessible is weak.

c-9400-1 (front) f-9400-8 b (back) the window is on the right side and opens to the right

Hello, Would you help me to identify this operator for Andersen Casement please? If Swisco sale this hardware can you tell me whats the product number. Thank you.

These were installed around 1986 when units were built.. I have 3 wood windows, all on right side with lock to left of the handle?when you open, they don't catch as you turn crank so it takes awhile to fully open. Didn't want to completely remove since I needed to close window afterwards? These were ... (cont.)

Looking for a handle which the number is on the arm 136-1468

These numbers are on the arm 1361460 07/16/02/1 Also measurements of the arms are 3 1/2 and 4 1/4 Thanks!

I am hoping you can help me. I have a picture window with two casement style windows on either side. It was installed around 2004 in a summer house by the beach. All of the hardware is rusted and corroded but my right side window (from inside) is the worst and I removed the hardware to replace it ... (cont.)

hi - this window was damaged by a bear getting in. looks like i'll need that bent arm assembly, as well as the crank and cover for the latching mechanism. also some of the wood trim parts and the screen. thanks for your help!

I have one casement window that it appears a nylon bushing has broken so it will crank out but not back in. Looking for a replacement. the part number appears to be C-9400-1

I am attaching two pictures below. Hoping for some help identifying the correct parts. Thank you in advance!