Viewing all customer Discussions for:

39-510 Clip-Stud Bracket, Left Hand

Need a new casement window mechanism along with the missing railing that should be attached to the window. Can you suggest the correct parts needed, if available through you? Thank you.

Hello! This measures 4 1/2" across and no longer cranks shut. Seems similar to the Anderson 4-1/2", but hoping for your help! Thank you!

This is a trapezoid shaped window that has broken hinges, rusted latch and extending hardware. Truth 3154 is stamped on one part.

I think the gear mechanism for this opener jammed or got out of alignment. It was stuck in the open position so I had to remove the hardware to pull the window closed. The sticker in the picture is the only legible identification that I could find on the window. I think I need the whole gear mech ... (cont.)

I would like to know the part number for the crank mechanism. The window measure 30"-31" wide and it is a right handed window thanks.

I am hoping that you can help me for some replacement parts. As you can see in my first photo, I basically need most of parts replaced especially the bracket in photo #2. In photo #3 the bottom bracket is #51512- 6" long. The curved arm is #31538A. This is part of a 3 window set with the middle w ... (cont.)

My windows use a crank-style handle to open and close. The handle itself still turns, but when I try to open the window, the arm outside doesn’t pull the window — it looks like the linkage is broken or disconnected. Right now, the window can’t be closed properly.I’m trying to ... (cont.)

Don't know much about these windows except they have Truth brand hardware. If you look closely at the picture, the Truth "arm" number is 40887. I don't need that, I just need the bracket that screws into the sash. Pictures 1795 and 1796 are another window that has the same bracket I need. ... (cont.)

Measurements straight 10 3/4 2nd 4 -7/16 and 3-7/8 Need 2 Right and 2 Left and 4crank handles .

9"straight arm 3" / 4" pivot arm

Need to replace window opener mechanism. The handle and shaft became separated and screw mechanism is stripped from at the gear.

it says truth. on the arm 20545. also says 30905 I also need a white crank

Will need L & R

THERE ARE 4EA WINDOWS, ALL OUTSWING, 2 EA LH, 2 EA RH. THEY ARE ABOUT 25 OR SO YEARS OLD,TRUST MECHANISM. OTHER THAN THE 20755 ON ONE ARM I DON'T SEE ANY OTHER MARKS. YOUR HELP IS APPRECIATED.

Someone cut the other arm, so not sure what I need but I also need the bracket the cut arm attaches to

Cranks out but not back in. Numbers are stamped on hardware in photos. Thanks Tony

Hello Both sides of bow window broken. Cranks stripped, spins and mechanism won't work. Only way to open is to unlock and pull from outside. Need complete assemblies for right and left side. Thanks Tom

Opens and closes the window

Hello - I am trying to identify the hardware to replace broken cranks/operators. The photos show Truth and 40942 (left side window) and 40941 (right side window). I have additional photos and videos if it helps. I need 4 left and 4 right. THank you.

Hi, Looking for a Truth controller, left 40753.