Viewing all customer Discussions for:

15-129 Pivot Shoe, 9/16" Thick

I need the full balance set including the shoes that hold the bottom of the window into the frame. This would be for two window. This is for a single hung tilt out window. Bottom sash measurements are 33 3/4 x 36 high. Please let me know price also. Thank you.

We bought several shoes to try out to replace this specific one. None of them worked with the current spring. Do you have a recomendation?

Do you have this part in your inventory. I need 8. thank you

Window balances are non-ribbed u-channel 36 inches long with the number 35e stamped in them. I need to remove the entire side plastic insert after removing both windows to install or remove balances.

Could you please tell me which pivot shoe is the right one?

For our tilt out window we would like to replace: 1) The spiral balances (2). The aluminum housing of the spiral balances is 25 inches long and is secured with a screw at the top.2) Also, need to replace the parts into which the bottom of the spiral balance attaches. Note the left one has a metal ... (cont.)

My bottom window does not seem to be engaging the spring to lift the window open

I have a broken sping balance for a large double hung window. Brand of window is EcoVue. It is a vinyl replacement window installed in 2009. The spring valance is 24" long, 5/8 "wide & 5/8 "deep.

Hi, Im pretty sure my shoe is a "Heavy Duty Pivot Shoe 15-268" , could you please confirm ? My pivot bar is flared and very simular to your Flared Slotted Pivot Bar 26-368. Will the 15-268 match with a flared pivot bar ?

Pivot bat is 3 inches long and has 2 holes. Pivot bar shoe has patent 4.610.108 stamped inside

I need 3 of the balances and 2 of the bottom slidder piece. The balance is 27" long, chanel is square, 5/8" wide x 1/2" deep. Number stamped on the balance is: C26SP B34 your onllne pictures I believe it is 27" series 700 Balance the part number is S770-27 option 27C is that correct? The bottom sli ... (cont.)

Looking for a replacement for this pivot shoe. The top of the nylon bracket has broken where it connects to the spring rope.

Do you have this part? No part number on the item

I'm trying to find the correct tilt sash balancer that would connect to the correct tilt sash keeper.

Please refer to photos for build label, windows circa 1998

I am looking for a pivot shoe that I cannot find on your website. I'm wondering if the 15-045 shoe might work instead of the one that I have taken a photo of. Please let me know if you have this pivot shoe or think that the 15-045 shoe will work.

Hello, We have a 34 x 86 inch triple glass window with double 8 - 3/4 inch constant force balances - they don’t hold up - is there a spiral balance shoe that would fit in the same slotnthatnwencan either use a double black tip spiral balance or possibly an Ultra Lift balance - the typical spir ... (cont.)

Hello, I need a replacement for this balance, thank you.

The piece I need is 1 3/4 inch long and the face is 3/4 inch and sits in a track that is approximately 1 1/4 inches. Or another piece that might work for these double hung windows.

looking to get these balances replaced im having a hard time finding these or can i replace with other balances?