Viewing all customer Discussions for:

15-143 Coil Bushing

Window is associated materials need pivot bar 21/4 inches it will fit into the 15-177 shoe also will replace the coil balance existing is stamped 10 the window weighs 20 lbs. I have used your s152 coils on other smaller windows but I don't see any s152-10 thanks for your help

Hello, I have a broken coil spring on a newer style tilt-in window, I know the window is at least 19 years old. No other issues other than one broken spring. I removed the coil and found it to be stamped with a number 5. I also removed the top portion, as seen in attached photo. I Should have ... (cont.)

We have older RSVP windows the pivot shoe housing is broken. Do we replace both shoe and balance springs or can a new shoe be attached to existing parts and how is this done. Most videos for replacement show both parts already attached or is this purchased as on unit.

Bottom window lock measures 1.25" wide and 1.5" tall. Depth of the channel is 5/8". The coil is 1/4" wide.

The replacement windows in the house were installed in 1995 by "Windows of the World" Little Falls, NJ. They are out of business. The coil balance in the windows are starting to break. Do you sell these parts? Any assistance would be very much appreciated. Thank you

I need the spring , there is a number 7 on it. The pivot bar , icant get the other one out I dont want to break it, Best measurants i can give you is 1-3/8 to first hole 2-7/8 to second hole and holes are 1-1/2 apart. The pivot bar carrier is 1-1/4 wide , 1/2 deep , 1-1/2 high.The pivot bar its 3 in ... (cont.)

Can yous help me with these thanks

need to replace balance, "white Metal" cam broke, no identifying weight marked on balance. sash is approx. 18" x 24" vinyl sash with insulated glass.

Hi: I have a few sliding up/down windows that is broken. Based on my search I found out The Pivot Bar and Blalance Shoes is broken and your company has different sizes and shapes. Please help me to find out which parts I need to order. Thanks so much for your help. Addition to my note : I made the ... (cont.)

Hope you can identify. See various angles of latch plus one photo of spring assembly. Thanks for your help.

Hello. Here's a photo of what part I need to order. Rep I spoke to said send photos, to figure out what I need to order.I need 2 coil covers and 2 bushings.I already got from you the coils and other parts for this window.Thanks David

This spring broke on the left land side of a window I had installed by "Window World of Connecticut a cuple years ago. I am unable to locate the part locally. In one of the pictures there is a very small etching on the white plastic that .reads "13". This part appears to be a single spring and it ... (cont.)

I need 4 of these

I have taken 2 pictures that show what I am working with. I believe by appearance and measurement that the "shoe" part of this assembly is possibly 15-175. I have not discovered any identifying markings on the windows. There are straight pivot bars at the bottom corner of each window measuring appr ... (cont.)

The coil has broke on 3 windows of the 10 we have in room. Alside windows will not repair, says out of warranty. They were put in the room in 2002 new. The sash/ window weighed 16lbs. So I am assuming we need a coil spring of 8lbs on each side. I have no clue what to order and the size. ... (cont.)

Help...I need...5 pivot rods.2 complete spring balance assemblies with white plastic covers.2 white covers for spring balance assemblies.The white covers are spring covers.Also need screws for all.

The part in question attaches to a knob on the side of the window and is part of the mechanism that keeps the window in its track when the window is raised or lowered. You can see from the photo that it is broken such that the window no longer is kept in place and tends to fall forward once the latc ... (cont.)

Need to replace this double coil balance. They have letter code rather than number. Cover says G & H but coils themselves are H & HL. I cannot find an alpha to numeric conversion table anywhere. ?? G = 7 and H = 8 ?? Assume the "L" in HL means long tail as it was the upper coil. I will need th ... (cont.)

Attached are the sash stickers of the original Double Hung Window order. I need to order several parts to repair these windows such as the Constant Force Coil Balance shown in 1399, pivot shoes 1298 and the tilt pins. Would appreciate any help you can offer. Gary

Hello. I am attempting to identify coil balances for my existing windows. They are double-hung tilt ins. Additionally, I would like to know if you have the 'pin' that is attached to the corner of the sash. Thank you for you assistance