Viewing all customer Discussions for:

58-021 Gray Pile Weatherseal, 3/16" x 3/16"

These are Window Products Inc aka Cascade Windows of Spokane horizontally sliding windows manufactured in 1994. The construction does not seem to lend it self to sliding out. The fours bodersbof the windows seem to prevent this. How can it be replaced?

I need a weather seal for my sliding doors I think the measurements are 4mmx4mm which can be match with your =s 3/16" grey weather seal.

Do you make this style?

Hi I measured the track at 3/16" by 3/16 approx pile. I'm attaching a photo of track for your advise on product to order. Someone threw out existing pile. I believe it's 58-021 thank u jim

I need 4 of these. You can call me thank you Jim

Swisco, Here is couple pictures of the side of the screen that I need the replacement part for it. Let me know if that helps and if you need more info. Thank you so much, Marcelo

I have 8 large windows with each sash weighing 20 pounds.I also have 2 smaller windows with each sash weighing 13 pounds. The rod length for all the sashes is 29 inches, with a rod diameter of 3/8 inches. I believe that the "Red Tip" balance will satisfy my needs for both window sizes, but I'll need ... (cont.)

Looking to replace this material in my sliding glass door

Looking to buy tilt latches, balance assembly, locks, and weather stripping for Simonton window. Picture contained window sticker. Thank you!

Hi! Taking my old pile weather stripping out, it's base appears to measure 1/8" but it looks like the smallest base size you offer is 3/16". Not sure on age of existing WS so maybe age deterioration could account for 1/16"..? Could the 3/16" base size still be an option for me? Are there 1/8" base ... (cont.)

0D8W0000 - Pella Sliding Door Screen Weatherstirp Package. do you have this kit available?

Need to replace pile weatherstripping for Huttig screen door 3'0" x 6'8" ( one of 2 doors) Seems to be 3/16" wide, light grey color Door no longer made ? was Huttig 21095/13989118

I need to order replacement balance parts for 11 windows (2 sets for each window) which would be 22 total replacement balances. I took photos and measurements on the balance parts. I also need to order replacement bubble seal weather stripping for the bottom of each window. I measured the width of t ... (cont.)

Hello, I'm looking for a few window parts and il do my best to explain what I need. I can't find any manufacturer name on the windows anywhere but it's a manufactured home from 1999 and the windows are original. I'm looking for tensioner or extension springs that help support the weight of lower w ... (cont.)

Pella 8' tall sliding door unit. I'm looking for the insulation that slides in the groove on the sliding door of the unit. This protects wind and rain from blowing in when the unit is closed .

https://www.swisco.com/Gray-3-16/pd/Wool-Pile/58-021 Seems like this is one of the part im looking for. But my windows also have another type strip that's included in the photos.thr damage is definitely on the pile. Let me know, i also have two sliding doors that need the same, but they look sligh ... (cont.)

Please help me figure out what weatherstripping I can use to replace the degraded material on my Alcoa windows. Does Menards or Home Depot carry something suitable? An item number or SKU would be greatly appreciated. I'd like to knock this project out before winter. Thank you.

Do you have the shown weather strip?The first picture shows a view from the top of the weather strip.The second picture shows the width of the weather strip: about 2/8 of an inch.The third picture shows the hight of the weather strip about: 2/8-38 of an inch.The fourth picture show the width of the ... (cont.)

Hi I wasn't able to locate these plastic pieces on the site. They are 1 3/8 inches wide and 1 1/2 inches long on both the vertical and horizontal sides. After 20+ years they are toast. Also I would like to add that I re-did the seals on 2 doors using your 58-021. Great product! I had bought a simil ... (cont.)