Viewing all customer Discussions for:

75-004 Wire Charging Tool for Non-tilt Windows

The top is secured by a single screw but I don't see how or where the lower spiral part connects as they had fallen out with the free end resting on the sill. 5/8" x 29". No identifying markings could be found. These are older replacement windows. (Central Florida) Aluminum single hung single gl ... (cont.)

I believe I am missing the bracket that the spiral balance locks into under the sash. They are non tilting metal windows. The spiral balance matches closely to the 5/8 in 500 series with the small butterfly clip at the bottom. i tried to capture the underside where I think the bracket should go. ... (cont.)

looking for these parts? tube length is 32 inch diameter is 1/2 inch.

I have PGT windows that have spiral balances (24" x 5/8" w/blue tip. We are about 100 yards from the ocean and the ends of the spiral balances are rotted off. Some of the aluminum frame is also gone so there is no place for the balance crows foot to connect to. Is there a part that will screw to ... (cont.)

This is from a C-Alwintite window. One of the sashes is missing both balances, and I cannot tell what the hardware is to be. The frame measures 34" high inside. The sash measures 17.5" high. One picture I sent is of a good window, and the other shows how the channel is empty. The frame is distorted ... (cont.)

I have a house built in 1985. All original Windows. None of the windows will stay up. Most of the spirals are out of the sash and will not stay in. I believe the Series 500 spiral balance 5/8" is the correct replacement, but I can't figure out what is the bracket to hold it. Could you please ... (cont.)

Your website offers some real good reading material. I have those builder grade non tilt windows. I know I need your S400-29 spiral balances. The bracket on a couple of sashes are broken. What would you recommend as my best choice: 17-031 or 17-094 or ????? Would the 17-031 interfere with the wind ... (cont.)

Hello - This is my first attempt at installing a spiral balance. I just ordered ten S500 balances, but I assume that there must be some type of clip that fits in the bottom of the window frame. I have attached a picture which shows the hook end of the balance. Please let me know if these clips ... (cont.)

Please let me know if you can identify all the parts I will need to make this non tilt window work. If you need more information, I will try to get it. Thank you.

I just bought a house, and all of the balances are broken. The windows are metal, single hung. They look like thin spiral balances. However, I can't figure out where the spiral latches onto the window jamb. There are no little clips stuck to the wall of the window jamb. I don't know if they were ... (cont.)

Trying to fix 1970 aluminum windows that the spiral balance has gone bad. The spiral drops to the bottom of the window frame. Closest thing I find is the S400-20. Would also need the appropriate bracket or attachment for this.

Hey This is the upper sash balance. The bottom sash balance is a spiral sash (same as Series 500). The diameter of the sheath (if you like) is 7/16". The length of balance is 29 1/2". Other dimensions are in the pics. I've looked and cannot find anything like this. Cheers Peter

Hi I need replacement spiral balances. the dimensions are in the photographs and the diameter of the tube measures 9/16" (so I guess it is a 5/8" tube).

Greetings, I have a total of 13 windows with failed spiral balances. I believe the windows are cheap, construction grade, Mayfair windows. I would like to replace all of the spiral balances, but I

Diameter is 3/8", length of the tube is 25". I believe I need the 400 series but there is no tip color option? Current tip is green. The second photo shows what the spiral attaches to at the base of the sash. Do I need to purchase anything other than just the spiral balance?

I need 4 tubes 500 series tube length is 46", sashes weigh 60 lbs each. I also need 2 tubes 30" for 30#sash, 2 tubes 28" for 30# sash, two tubes 25" for 30# sash, I need 4 tubes 28" for 40# sashes, I need 2 tubes 25 " for 30#sash. I also need the bottom ends attached for screwin

I bought my house in 1968. It has spiral balances in one window, dating to 1966. The windows measure 52" W x 26" H The bottom sash moves up and down on plastic spiral 23" long, 3/8" wide. About 1/4" from the end, at the top, is a rivet to hold the balance to the jamb. It looks exactly like y ... (cont.)

the tips on my spiral balances are white. the windows are from the 1950s I am guessing series 400 spiral balances but not sure of what tip color to buy.

Have two wooden sash windows with broken old spiral balances. Would like to replace. Windows have a routed channel 5/8" on both sides. Windows are 24" high approx. 8 lbs ea.

Dear Swisco, I am trying to replace the spiral balances on a couple BetterBilt single hung windows. See photos below. I can