Viewing all customer Discussions for:

75-006 Spiral Balance Charging Tool for Tilt Windows

The one I think I need your part number 15-046 On the one I have there is a number 550C It is 1/2 deep 1 1/4" wide and 2 1/4" tall the hole for the window Bar loos to have some wear on it the measures i come with for the hole is 11/32" wide 7/32" tall the small tap looks to be about 3/16" wide i ... (cont.)

I am trying to find appropriate Tilt Window Replacement Pivot Lock Shoe. I cannot find a name brand on the window. The open gap in the window track appears to be about 1/2". Included in attached images is what the part looks like complete and another one broken.

Hi, I need a the seat at the end of the balancer and the post that is attached to the window that goes in to the seat. Thank you, Sarah

Hi, I took the sash out and the balance is 28 4 FX CMC 11. Approx SH single pane window size is 3'9" wide by 5' high. They are PGT and installed in 1982 in FL.Just want to order the correct parts. Also have a window that is impact glass single pane SH 4' wide by 4'6" high that does not appear too ... (cont.)

I have 12 windows in need of 2 new spiral balance shoes each and I do not know the manufacturer of my windows - they were installed when the house was built in 2001. I have included a picture of an existing operational shoe. I have also removed a bad one and measured it as follows - 2 3/32" ta ... (cont.)

upper sash will not stay up when the lower sash is raised. need to identify and check availability of the part that retracts the pivot shoe to hold window in place

Hello, my spiral balances measure .385 in diameter and have red tips. The ones I've measured so far are 26" and 24" in length. I just bought the 1998 Skyline Brookstone double wide and all spiral balancers appear to be failed which caused the pivot pins to break on every window but one. I found the ... (cont.)

Can I use a blue in place of the red as long as I?m within the weight parameters? Is the blue more durable/heavy duty than the red?

Can you help me identify a replacement for this? According to my measurements it is 1/2" thick, 1 1/4" wide, and 1 1/8" tall

I need to identify this part so l can purchase it and I don?t know the manufacturer Please help THANKS

I need 3 of these balances, but am unsure of which color tip is needed. Are there any other parts needed for install? Thank you!!

I believe I have properly identified this part as the 24? series 600 Spiral Tilt Window Balance with the Red Tip. Could you verify. Also, the parts that go with it is needed. I believe I captured all of them in the pictures but could you tell me what they may be so I can order them. I will be o ... (cont.)

It?s the bottom of the spiral balance

I have been trying to locate this part I haveattach photos please let me know if you can help or need more info thanks 3 Attachments

Trying to repair a few broken vinyl Windows and I would like to replace these

I need to get 12 of these balances. They appear to be a cross of the 400 and 900 series. Please advise I need these quickly for a client.

I need a spiral balance tube. Mine is 3/8" diameter and is 28 3/8" long from the top to the spiral right where the nylon tip is attached. The tip is white in color. Do you have this one or will the 28" or 29" work? What tip color?

Hi, I'm not able to identify which spiral balance and pivot shoe replacement type to use as there is no color coding for the existing one. The current spiral balance is 28" long and 3/8" wide. I think the pivot shoe is 5/8", but couldn't get an exact measurement because I don't know how to get it o ... (cont.)

Hi I am needing help ordering parts for two of these windows both with the same problems staying up. I need (4) counter sash balances, (2) left, and (2) right. Also (4) spiral balances total. I have only these three pictures and the information given to go off of for a client that needs these fixed ... (cont.)

this are windows I inherited in an NYC apt building that swing in for cleaning