Viewing all customer Discussions for:

16-002 Take Out Clip

I need replacement of the part in the attached photos I need both sides for my gapco windows Please quote a complete assembly and or parts to make a complete assembly

I would like to purchase several replacement balancers of the type above.

this window has never worked in the years I have lived here. i see there are some broken parts in the frame. please help me find the parts i need. the sticks are about 29 inches long, there are no catches on the holes in the metal window frame. please help me find what i need t make this window work ... (cont.)

this measures 22" and you can see the plastic end is 1". I also need clips for the window frame as they are missing. Thank you

Looking for this window sash stop so I can replace the balance . It is broken just comes right out .

This is printed on the balance. 20 2 EW CMC 10. I also am missing the metal clips that go inside the window frame trough

Hi, I'm trying to identify a windows channel balance with the following text printed on it: 27 4 EX CMC 4 I also realized that the inner "stopper" that needs to be extended out in order to remove the channel balance is also missing on one side of the window. Do you sell this part as well? I ... (cont.)

Hello, I believe you can make these by reading some of the other posts.(which is very helpful on your part). The length is 25" Stamp 2430 I'm hoping you don't need all of the other dimensions. If so please let me know. I need 4 of these (2 windows), also I will need 4 take out clips part # 16-002. ... (cont.)

Need to replace channel balances in two windows. Want 4 channel balances 26 3 GW CMC 11 plus four 1 1/4 X 1/4 takeout clips.

Need (2) Replacement Balances and clips. Stamped on Balance: 2240 BSI EN

This is from a Caldwell window, the metal piece is 27" long, the window is non tilt and 25 4 are the numbers stamped on it. Could you please identify what i need for a replacement? Also need what I think are called take out clips. This is from my daughters and son in law house so I don't have the ... (cont.)

Hi, These windows are appx. 25 yr. old, and there is no identification I could find on them. I can't get the window out.... I think the plastic square blocks on each side, at the top of the window are maybe supposed to be popped out so the window can be slid over in the track...but I'm hoping ... (cont.)

The piece to hold the sash window sash balance take out clips fell into the frame. Where can I get the replacement?

Need the metal clip on other side as it's gone missing. Total length is 28 inches half inch both sides of the balance.

BUILDERS WINDOWS ...16 YEARS AGO INSTALLED NEED JUST 1 CHANNEL BALANCE & 1 CLIP ON INSIDE WINDOW

Looking for 10 sets of channel balances. 2 set for 30DS 35 31" metal length for 37# window. 7 sets for 3040 31" long metal and 24# windows 1 set for 3030 31" metal and 18# window Also needs like 3 metal clips. Please let me know part numbers so I can get ordered.

Having a tough time locating this size sash guide. You always came through in the past. Hope the pics help you.

I am looking for a number of spring clips and channel balances for: Channel #28301 b.s.i. 30 inch bottom balance shoe is 1 1/4 in. wide. Window identification tag is DH - R30 Spring clips are 1 1/4 in. length and 1/4 inch wide. 4 pictures attached

Hi, I have a customer looking for (2) channel balances and (2) take-out clips for the above window. The metal portion of the balance measures 28" (29" overall) and is stamped as shown, otherwise no other marks.Philips DH-R30Series: B10 or 810 (hard to read the first digit)Code: RP-0403Regards,Ted ... (cont.)

Looking for price and delivery time on new block and tackle slides for my Arizona room windows. I'd like the 8 slides, 8 of the plastic stop that attached to the window and 6 of the metal removal clips. Channel length is 21 inches