Viewing all customer Discussions for:

16-002 Take Out Clip

metal channel is 18 5/8" long 1/2" wide stamped 18 2B.S.I.0A the bsi crosses the restmanufacturer unknown long term residents say they were installed at least 10 yr agoIts possible that some were purchased from you in the last couple years under one of the following namesValley Hi Apt.RK Bar Prop ... (cont.)

L 27in, W 5/8in stamped number is 2630 Hook is on the shoe.

My sister lives in San Francisco. I live in Washington state. I'll be traveling there to help with some miscellaneous house projects. I'd like to have materials there when I arrive as I'm only there for a few days. Hopefully, with your advice, we can get the correct balances. They are probably 15-20 ... (cont.)

Need new parts and I have two kitchen windows that I can not buge up or bring the balance track down. Can you help me

Hello . I need help purchasing a window balances.

hi this is a residential single hung window. window balance has a stamp of 25-5 GX CMC 11 on it. the locations of two slot on window jamb looks like very close to each other. need 4 piece for 2 windows.

I am looking to order 2 channel balances, imprinted number 3460 and 4 channel retainers. I do not see the 3640 as an option.What is a comprable piece. I've included a picture of both above. Thank you, Lou Sandora

Do you carry these cpils?

Looks like top sash guide on both corners is broken. The width of the channel is 0.5 inches. I would also like to know the channel balance replacement part for my existing channel balance. The channel balance marking is 17 2

Need the small clip that you lift with the flat screw driver came off and not usable. Need new one. Thanks

I’d like to purchase 12 slider elements as shown in the attached pictures. I’m replacing all the sliders for six windows, so I believe I need six for each side in this size. The code on the slider is: 29 4 EW CMC 10, and the metal piece is 30” long. I’ve included photos sho ... (cont.)

It has a stamp on it 15 3 Length about 17" Unknown window manufacturer I need 2

This clip is used to hold the spring so the window can be removed

I need 2 balances for an aluminum window , and 4 takeout clips. probably Milgard. 20 years old. 27-5/8" long (measuring just the steel), 1/2"wide, looks like series 385, wings at each end. the stamp is 27-4-BS (possibly BSI) ,pa. The takeout clips are for an aluminum frame and break easily when r ... (cont.)

Looking for a part

Hello, my broken part is on the left (darker item). I ordered the one on the right thinking I had it correct, but it is not the same density and has a larger shoe. Please let me know what part I need to order to match my existing broken one? I also need to order the corresponding clip that goes i ... (cont.)

Both balance are stamped with the following. 86 26-4 GC5 CMC 45. It seems like I am missing the release clips that clip into slots on both sides of the window frame, please let me know if you carry these clips and the part numbers.

Kirmin is the Manufacturer licensec number 32014. Balances stamped with 26 4 Sash weighs 20 pounds Length from end to end 28" or 27" from bottom of plastic top end to top of plastic bottom piece.

Custom Balance

Hello. I was closing my window today, and a plastic clip broke and the strings from the "guts" of the side rail were hanging out. It has gotten cold and the window needs to be closed. The window is 34.5" wide, and 56" tall. Can you help? Thanks.