Viewing all customer Discussions for:

82-005 Surface Mount Sliding Door Handle Assembly, 4-15/16"

Thanks for posting. We believe that the handle set you're showing was used to replace an older style that that came with the door. We likely won't be able to find whatever was installed originally; but your existing handle set looks like our 82-005. This is a surface mount handle set, with a hole sp ... (cont.)

These are pictures of the front and back of the sliding glass door missing handle and latch mechanism

House built in 1976. Need inside lock with spring and also weather stripping and maybe rollers for door..I have replaced rollers once. It is a heavy door. Also need big window crank part for rollout window..left.

I think the holes are 5 3/8 inches apart. The doors are aluminum. The whole mechanism fell apart. Please help. Thanks.

Need a new handle/lock for our Peachtree sliding door. Numbers on handle are:Canadian Patent #919213Patented in 1973Part #3596954The one pictured that we took off doesn't have an outside keyed lock. We would love a keyed outside lock if possible.Any help would be greatly appreciated.Thanks,Bill ... (cont.)

i have a lik it sliding patio door, made in san leandro ca, door pat 3106753 seems like your product 82-005 is very similar original door and lock - house built 1987

Hi. I have a patio sliding door with a handle that is difficult to close and lock. Attached is a photo of the part that apparently needs to be replaced. The stamp indicates that it was manufactured by Reflectolite. I don't have the exact measurement, but think that it was about three inches long ... (cont.)

I am hoping not to have to drill any holes, the screws are 5 3/8" apart. Any suggestions for a handle that would fit these pre-drilled holes? The handle is clamp style.

We need to replace this patio door handle. We need help in finding the correct handle to order.Please viewphotos and inform us of the correct size. This handle is engraved: Peachtree patent 1973. Thank you. Julia

I'm trying to find a replacement handle for a sliding glass door only #s I have patent #s lock 3596954 inside lock, 919218 plastic handle support (inside handle) wooden handle 9 3/4 inches, inside lock housing 7 3/16, screw holes 4 15/16 door itself three holes large one in center, handle set sandwi ... (cont.)

I am building a sliding glass door out of steel in a metal shop. I am looking for a lock mechanism and lock trim in flat black that I can use to hold the doors closed with a keyed lock also. I am familiar with Pella, Andersen style patio doors. Having said that, I can build the door to receive an ... (cont.)

Need to replace lock part of patio door or to replace the whole thing including the handle. This door is from 60s

We are looking for a sliding glass door handle and lock assembly...

Window will not open. Have tried other crank handles. I have two Citation doors slinging 4foot doors. Handles and locks are oldd and I'm having trouble with them. Also need 4new crank handles for windows

The holes are not 3-15/16, but are 3-7/8. The outside handle needs to be totally flat to clear the screen door.

Closet I can tell is 5 inches between screws.

Latch is locking from gravity. Found part of what I assume is a broken spring to keep the latch up. I'd rather buy a whole new assembly that will fit this door then try and figure out how to attach a new spring. Hopefully you can point me to a better quality replacement handle and latch mechanism. T ... (cont.)

Patio door handle.Reflectolite product. Mounting screw offset 5". No key lock. MN

WHAT DO YOU HAVE FOR REPLACEMENT OF THIS STYLE...?.ANY COLOR WILL BE FINE? PLEASE ADVISE.

Hi, The latch on our slider(circa 1980) broke off. I can't find a manufacturer or any numbers on the sliders. The approximate dimensions of the piece are 6.5" L x 1" D x 1.25" W. I went to three hardware stores and no luck. See attached photos and let me know what you think. Regards, Heather ... (cont.)