Viewing all customer Discussions for:

82-005 Surface Mount Sliding Door Handle Assembly, 4-15/16"

I recently had the rollers replaced on one of my sliding glass doors (opens to the right) but the repairman accidentally broke the plastic piece that moves the lock into place so I need to replace that plastic piece or the lock mechanism inside the handle. The house was built in 1960 and the doors a ... (cont.)

We purchased item 82-005 but it is wrong part. I am sending pictures of our current parts. Help!

Need help identifying an early to mid 70

Hi, Will not lock. Do you sell the unit with keeper. We could use existing handles? mortise is behind or inside aluminum tubing. Do I hold with pliers and drop down to clear tubing cut out and then pull unit out? Thank you, Ken

I ordered 82-261B but it is the wrong size. I am concerned that this may not be best part. Using non-mortise handle since the lock is round, not sure 4 15/16 will cover holes on outside of door.

I ordered a door handle from you guys previously and it was not a match. I have attached photos and I

Hi There, I would like to change this lock system to one that has a key. Could you please recommend which product would work and how to install it. Thank you for your time. Jolene

where can i get a replacement? Thanks RYLOCK

Screws holding on the locking handle are 4 inches apart.

Our sliding glass door handle and locking mechanism came apart in multiple pieces, several of which appear to be broken. The only marking is patent number 3,596,954. I assume this is for the entire assembly but cannot tell for certain. It appears we need to replace the entire assembly. Do you have ... (cont.)

Aluminum with wood handle.

I would like to purchase 2 sets of replacement hardware. What colors can I get? What is the price?

I have a patio door that continuously falls into locking position. The patent number is 3, 5 96954. The distance between the holes is 4 and 7/8 inches and the overall dimension of the lock is 7 5/16. Pictures attached. Please indicate if I need both an interior and an exterior piece to repair this p ... (cont.)

I have a customer that has a arcadia patio lock that is all there but know longer works can we get them parts see photos.

I need a replacement handle for this glass sliding pocket door. The lhandle needs to be low profile to clear the second pocket door. The lever slides up and down to lock the door. The door still locks but latch is worn and sometimes does not stay up in the unlocked position.

Trying to find the correct door handle and lock for this sliding glass patio door. I do not have pictures of the previous door handle. This is a rental house and the tenants trashed it. I have attached a picture of the only information I can find on the door SGD-R20-73x80

hello, I have an 80 vintage Reflecto lite sliding patio door. I believe the 82-005 handle will be correct for my replacement handle but I also need the lock mechanism. pic attached . Locking tab is broken off

Hi, I hope you might be able to help me find a replacement for an old Arcadia sliding glass door handle. As you will see the handle and door frame has 3 holes- the outer two are 6 inches apart with a larger center hole. Best, Bolyn

I'm beginning to realize that there may not be a replacement for this setup. I'm looking for something that will require the least amount of modifications to my door. I'm fine with drilling a new hole to accommodate a narrower spacing.

handle is 7.25" high by 1 1/16' wide; screws are 4 15/16" apart part is brown/bronze