Viewing all customer Discussions for:

82-005 Surface Mount Sliding Door Handle Assembly, 4-15/16"

An identical, direct replacement patio door handle is needed as shown in the pictures. The door was installed in the late 1980's and there is a "W M" marking on the top of the handle. Any help would be appreciated.

Can this be replaced? I can

Please identify this latch. The inside and outside handles have broken off. It is marked with Canadian patent no. 919213.

looking for piece lock goes to.

The original hardware on our house was installed around 1955-1956. I have a sliding glass door handle that has a broken plastic lever, so can no longer lock. 4 images are attached. There is no manufacturer's name. However, it shows it was manufactured under patents 2,710,156 and 2,701,157. A Go ... (cont.)

Hello, Our sliding glass door handle no longer functions (locks). I have attached several photos: The first 2 are the outside handle The following two are the inside handle The last is the actual locking mechanism The outside handle has no markings The inside handle I believe have the ... (cont.)

I have a sliding door lock that , from the people I've talked to so far, apparently is out of production. I have a photo of the lock and have made up a drawings showing the critical dimensions of the lock cutout and screw spacing. I have a sliding door lock that apparently is out of production. I ... (cont.)

Can I still get these?

No names or markings that I can see Probably from 1973

Im a locksmith and work on many sliding doors mostly Anderson. I have this door that i cannot find out who made it or where to get a new handle and lock the lock is broken and stuck locked, I would of taken the lock off but if I do the customer cannot lock it the door was also installed upside down ... (cont.)

The one I see pictured on your web site appears to be smaller than mine, do you have this one?

Current handle screw holes are 4 15/16" apart Hook lock system into doorframe, see photo Current outdoor handle is too short at 71/4", opening hole on door is 8" see photo We would like 2 easy to grab handles for inside and outside

Please look into these pictures and offer some replacements for this lock.

I would like to replace this keyed patio door handle with the same thing or something that will work and install in A similar fashion. Please see the pics. Thanks so Much,

I would like to add a keyed outside lock to my glass sliding door. I think the door is a Peachtree from around 1975. The current handle only locks from the inside and I would like to add a keyed lock so that I can lock and unlock the door from the outside. Do you know what lick I would need? ... (cont.)

Acorn dor/wall Screws for inside handle are 3 1/2 inches apart . I was told it is most likely the handle set 82-005 which includes the keeper plate. The lock is a lever, not a key lock. I have 2 doors needing handle replacements - one is right and the other left. I know per your video that you can ... (cont.)

Hopefully, the pictures will help you to identify. The lock is broken (or mechanism "soft" so that it can lock by slowly sliding into that position. i have been locked out!

Do you have a replacement for this handle set?

Is there any parts availble for this old style lock ????

Hello, the little lever for locking the door fell out and has no mechanism to hold it in again. Do you have a full replacement that would work? Or any parts are recommendations? Thanks, Mark