Viewing all customer Discussions for:

82-033 Patio Glass Door Handle Set, 3-15/16"

I have a slider door and need the tumbler and keys and also the lock mechanism. Its the one on top left of the attached picture. Thanks Lee

The knob handled needs to be glued. The lock hook is not staying in position, one must re-adjust the hook so it stays in the correct locked position. The door is 33 years old as is the house. We had the house built in 1986.Total length of black interior piece is 7 3/8"Distance between the two screws ... (cont.)

I was wondering if you could help me find a handle for my sliding door. It's 1973 part patented 1973 number 919213 and also the lock please Canadien Pantent number 919213. Screw the screw is 4inches. Thank you

Hi, what kind of locking mechanism/part do I need to add to my door handle to make it a keyed entry sliding door? Where can I find it ? I think the link below shows the same lock as mine. 82-005Will appreciate your help.Thanks,Yasin

Hello. I have a locking mechanism on one of our properties that no longer has the lever to lock and unlock the door. These doors seem to be dated and I would like to know if there is any way to purchase the missing piece. I am trying to keep the same lock if possible as there are two side-by-side sl ... (cont.)

I bought the 82-033 that looks just like my old one. I have a few problems though. 1. The inside handle has bumps on the part that sits flush with the door where the screws go in which means it doesn't sit flat, there is a gap making the handle not as strong or stable. My old one had a flat surface ... (cont.)

The door holes for handle are 4 and 15/16 apart

I am trying to find a handle that will fit this old door. I've bought rollers from yall for this style door. There number is 81-279. Let me know if anything similar is available. Thanks

I am building a sliding glass door out of steel in a metal shop. I am looking for a lock mechanism and lock trim in flat black that I can use to hold the doors closed with a keyed lock also. I am familiar with Pella, Andersen style patio doors. Having said that, I can build the door to receive an ... (cont.)

Help me find this please!

I have this slider that needs to be fixed prior to selling. Everything that I have found doesn't appear to allow the lock assembly to mount flush with the door frame. Is there a backer plate that is supposed to be installed 1st and how does it stay in place. No screw holes exist in the door frame, s ... (cont.)

The lock on one of our patio doors is no longer working and the exterior handle is broken. The door was installed during construction by Champion Windows of Houston. Unfortunately, they are no longer in business. Local Champion Windows in Austin, TX does not service new construction products. Referr ... (cont.)

I'm looking to replace the locking mechanism for this door. Please review and send a quote or give me a call?The lever to lock the door has sheared off.Can I get the lock and lever without the handle?Please let me know?

I believe the required information should be on the labels. I have been unable to identify the door manufacturer but would like to install a key lock on the current handle. Please help in identifying a suitable part. Thanks!

I have Arcadia sliding glass doors from 1973. The locks are broken. I need to find replacement parts. Also need to replace ball bearings/wheels. Please let me know if you can assist.

I need to replace an outside door handle on a sliding glass patio door. The code on the door is WS igcc cba 03 igmac WS med. I believe this is a Weather Shield Door. I checked their site and it looks the broken door handle is part number 972135. The dimensions are 7 1/8" long by 1" deep by 1" wide. ... (cont.)

Here is the pictures and measurement of parts we are looking for. See attached.

Hi! I need balances for 5 windows. My measurement for the width for the balances is 5/8. The balance is 28 inches. The window pane is 34 inches x 29 inches. I attaching a picture of a patio door handle also. Please let me know what to order. Thank You!

Could you be able to help me with the following parts for sliding doors? can you fine these double wheel assembly ? they fit a 6? opening of the bottom of the door the following are for the handles of these in black or stainless steel? they are approx 9? H x 1 1/2? W

I've got a broken mortise lock, round face, that I'd like to replace. It's half an inch wide with 3 11/16 inch spacing. I'm thinking I'd might as well replace the 20 year old handle.Are part numbers 82-033 and 82-032 identical except for the color?Thanks,Luis