Viewing all customer Discussions for:

82-218 Mortise Lock, Round Face, 3-11/16"

Need replacement lock. Broken. When I went to remove the locking device Fell into the door

Slider glass door handle lock and foot lock for slider. I believe the door is a silver line brand.

American Craftsman (believe is 2007) says Series 5800-SGD--also other numbers MFR-SL1. As you can see by the photos, I've had to replace pin with bolt and put JB Weld on outside cracked handle. Please let me know if you need additional photos.

Hello, I have a sliding door that the keeper is missing. Can I get just the keeper? Also looks like the holes for the keeper cannot be re-use. See attachment Thank you in advance

The knob handled needs to be glued. The lock hook is not staying in position, one must re-adjust the hook so it stays in the correct locked position. The door is 33 years old as is the house. We had the house built in 1986.Total length of black interior piece is 7 3/8"Distance between the two screws ... (cont.)

I need a keeper for my WASCO sliding door.

Looking to find a replacement mortice lock for BFRich sliding door.

My mortise was destroyed and so was the key. Handle still sits in door but I can't lock it. I believe it is the 3 11/16 Morris kit. As you can see I had to really do a little finagling to remove mortise which caused a little crack on bottom screw hole but I can use a washer to secure. There is some ... (cont.)

Hello - Can I order the pictured replacement lock from you? I didn't get a match when I entered the part number 32435, so can you please recommend a compatible lock? Thanks for your help.

The pictures of are the door lock area. The AAMA/WDMA/CSA Series: 311/312 SGD P.L # 073-151

I need the handles or at least the mortise lock. When I took the handles off, the lock fell down the door. Thank you.

The issue is the latch mechanism, inside it is worn out. The last time I took it apart, it wouldn't go back together. There are no labels to tell who made the door. I'll send the pics in an e-mail.

I need the lock parts for a sliding door. Inscription on glass says: CTGB Tempered 10 (or 18) CFR 1201 (Symbol looks like H) SGCC 1022 5/32U The door is 8ft w x 80in h, the door slider is 47.5 w x 77.5 h, door handle screws are 4" apart, handle bar is 5.5 " door end inside screws are 3.75" apart ... (cont.)

Hello Swisco, Can you please help me identify the attached locks, I need to order qty 30 of these.Thank youKirt

I need to replace the mortise lock in my patio door and it looks like either your 82-243 or 82-218 would be perfect - right down to the angle details by the screw-holes on the end of the mounting/keeper plate. The only identifying mark on the lock is a *V* on one side of the case. The lock was mou ... (cont.)

Thanks for posting. See our 82-035 Handle Set. If you need a new mortise lock also, see our 82-218. Take a look and see what you think.

Please help me identify latching mechanism for blomberg sliding door. 3596954 number found

Hello, I have been looking at Home depot, Lowes and Acehardware stores but I couldn't find the lock for my door. I looked at this part, 82-218 mortise lock, that's similar but I don't know what part to place on the left and right. Can you please help me in detailed? Thanks. GUARDIAN GENEVA, NY ANSI ... (cont.)

Handle set has 3-15/16" hole spacing. Need a replacement handle and mortise lock. The mortise lock fell inside the door.

Only tag I can find is wore out but here's what I can read SGD-C20 / SGD-C25 MST: 10080 / 100610 ???MA 101-93 I'm looking for a replacement handle the locking mechanism works fine with a screwdriver to turn latch Do you have this part or can tell me the part number ?