Viewing all customer Discussions for:

17-012 Bracket, #32

We are located in Toronto, Ontario, Canada, and are looking for spring balances for wooden single-sash windows (non-tilting) installed in 1954 when the building was constructed. We would need a minimum of three balances (preferably four) for the two windows, since there is only one balance ? i.e., ... (cont.)

What kind of spiral rod should I use to replace the old ones? How do I remove the old ones? The old spiral rods are 7/16" in diameter and 22" long.

Trying to get the right balances for non tilt aluminum windows ,the old one is the rusted one.

I want to replace this spiral balance system I now have with new parts/system

Aluminum non tilt windows. lower sash weighs 10lbs tubes are 25" long and are 9/16 diameter. House was built in 1967, almost all are broken. some of the lower brackets are bent. There are 13 windows this size I would like to repair. Would like exact replacement, but could modify lower attachments ... (cont.)

old part, original balance from about 1940 I think. Photos are from a different window thanks

Can you recommend a replacement balance for my windows please. Thanks. Early

I had order balancers a few months ago and sent back because they didn't fit the clip. Attached pictures are of the clips. Can someone please get with me so I can order correct items.Thank you Lance

26" non tilt 5/8 spiral balance with some kind of housing ive never seen.

I have old 1920s wooden sash windows that I'm replacing with new ones I'm building in my shop but I don't want to use the original weight and pulley system as the balancer. I'm not sure which balancer you sell that would be the appropriate balancer (and additional parts) for my need. Can you direct ... (cont.)

I am working on a project where I have to restore old single hung windows. I need some hardware such as sash weights and any other hardware that will be needed. Can you help with this? The windows are going to be single pane wooden windows. Thanks for your help.

Hi, Can you advise about parts? The original balance tube is 27"x5/8", the tip has no color, and there are no markings or numbers on the balance. The bracket is attached with a rivet and fits into a mortise on the bottom of the sash. I think I bought the wrong balances (S200-27), because they hav ... (cont.)

I need 4 spiral balance - 30 inches long. The existing ones have a white tip. The weight of the window (using a bathroom scale) is 32#. The window is a double hung non-tilting sash. I need 8 plastic clips as shown on picture and 4 metal clips as pictured. There is a sticker on the window whic ... (cont.)

Just want a be sure I get the right replacement sash balances for these windows. House is from 1951. Appear to be 27" x 5/8"? The ones that have broken have fallen out of the bottom of the sash then gotten bent. No visible markings on the balances, seems like aluminum exterior with steel springs. Th ... (cont.)

I am restoring some old (1946-7) single pane double hung windows, I am looking for jamb sliders, and more so the springs that go on the side, they have a spring and a flat twisted piece that goes into a tube that fits in the side of the sash of the window. can you help? the sashes have 6 lites each ... (cont.)

9/16? tube, 29? long, 31/4? bracket, 14lb window. Need 2 balances. 2 brackets.

Need the springs and the brackets that attach to the bottom of the window. Can you help?

Refinishing and refurbishing 50 yr old wooden double hung windows (I'm guessing non-tilt) and the spiral balances are broken all the top parts and some of the bottom. Please advise how to find replacement parts. I measured 21" long (tube) and diameter of 5/8" (though it looks like 6/8" to me if it ... (cont.)

here is a spiral which I have on windows. do you have or know where a new one can be bought? this spiral was under tension. do you know of how or a tool to apply tension? do you know what kind of lubricant to use on this spiral? any info would be helpful. thanks.

i placed order i ordered series 500 spiral balance. Paul