Viewing all customer Discussions for:

88-002 Wood Pull, Hourglass Shaped, 6-5/8"

Needed a replacement lock for my door. I also am not sure of the model number or manufacture of door. It is a 107X80 brown aluminum door. I was also looking for the rollers!

WINCORE SGD-R30 500 Series. I need, all or as many as possible, part numbers for this sliding glass door that was brand new in 1989. I cannot take the door off until I have the rollers or possible rollers due to a very ill patron. Most importantly I need to replace the top and bottom bolts, screws, ... (cont.)

I have a sliding glass door. The handle and the hardware is broken. Specifically, the portion where the top screw is inserted -- in the metal hardware that's in the frame of the sliding glass door -- is stripped. I'm interested in replacing all components -- the handle and the inner and out metal h ... (cont.)

Hello, I have this type of door lock for my patio door, and I would like to add a handle to the outside, so it can be opened more easily. Can you suggest what I need? I would still like to close the door from the outside. Thanks

Current unit has handle inside and finger grip outside. 6 9/16? hole centers. Do you make a direct replacement with double handles? I need 3 units. Thank you!

This is the condition from time of purchase. Looking to ID proper mortisse and handle to repair without replacing door at this time. Thank you.

I only have one handle on my sliding glass door.......so I am trying to find a second handle to install and where to buy one.

Hi, They are 15/16" wide and exactly 7" tall.. Doors are 45 or so years old. You can see a contractor tried to retrofit something and it didn't work. I need both a left hand and right hand one. Thank you, Bill

Not sure we can fix this so do you have a replacement?

Hi,This sliding glass door is very hard to be pulled/pushed to open/close. My handyman told me it needs a wheel to make it pull/push smoothly and easily. Also from the pictures you can tell the handle is broken into two parts. The lock maybe still good.Please help me identify the parts for wheel(s) ... (cont.)

Screw holes are 6 1/2" apart

My sliding door is 1" thick. The current handle/lock was purchased from Lowe's. I am searching for a handle and lock assembly that has a more secure feel and lock ability. I can't find any numbers to identify. The on center of the screws are 6 9/16" and overall is 7 1/4" If you do have an assembly ... (cont.)

NO part numbers found this lock is off of a patio that was installed in 1990~Jonathan

I need the hardware for the left side of the doors. It is a three door system with lock mechanism on both sides. The photos attached are of the right side. The one of the left was replaced by the previous owner but the hardware does not match the keeper and will not lock. There are now identifying n ... (cont.)

Searching for 6080 bronze aluminum locking mortised haI am missing the night lock on a sliding patio door. Attached are photos of the sticker in the door and what the door looks like. I contacted MIWD, the original window installers. They told me the part I am looking for was a product of BetterBilt ... (cont.)

I need some BRONZE patio door handle sets (6-5/8") for 1" to 1-1/8" patio doors and couldn't find any in bronze? Can you help me locate them?

I need a patio door handle the mortise is 71/8" high3/4" wide with a 3/4"x3/4" mortise on edge of door

My patio door handle from inside is broken. Previously I ordered Wood pull, Hourglass Shaped, 6-5/8" handle. But its broken in short period mean handle is not broken but handle and patio door connector broken. Please see the picture and advise me what type of Patio door handle should fit ? ... (cont.)

Please, could you recommend a replacement handle & lock

This is the original lock on my sliding glass door. It no longer works. Looking for a replacement kit. Am I correct in thinking that the 82-002K door handle set may be the solution? Do I also buy the 82-002 handle separately, or is this included.