Viewing all customer Discussions for:

19-005 Channel Balance Top, Winged

Balance is 28" long and is stamped with 27 4 CALDWELL HM. Pictures include both ends including the stamped information provided. I will need a total of 4 balances for 2 windows. Bottom shoe looks like 15-004 and top shoe is similar to 19-002 but has wings as shown in picture

Hi, I recently had a window balance pop loose from the sash. I have Milgard, single hung, non-tilt windows. When I removed the balance I noticed that the top portion was damaged (parts of the catch area were chipped off and it was missing the spacer on one side). The top sash guide was also heavil ... (cont.)

I have a set of window balances and the only stamp I can find on them is 27 1/2 3 Caldwell FM. I need to know what the series is or something. Thanks.Renee

They are 27 in long. Looking for replacement

Hello,I have some Viking windows installed when the house was built (about 20 years ago) that had a plastic piece break off. The plastic piece is between the window frame and the main window that moves up and down.The first picture is what the window looks like. I couldn't find the window make/mod ... (cont.)

replacing Milestone series 1000 channel balance maybe S380 29? length is 29 "

I am looking for a replacement channel balance. Mine is labeled 28.5 LQ Caldwell. It is 1/2 inch. Can you please direct me to the appropriate part? These are in a CWS window.

20-2 on balance

I have rollyson top window sash guide 60-675BL. I understand the Black is no longer available and only the 60-675 in white is available. I wondered if it's possible to tell what window model I have as well as the balance model based on the sash guide number.

I have 20 Alenco windows that look like they have the same Channel Balance that you have in your video. Half of them are broken, both sides. I would like to replace them in all 20 windows. My home is was built in 1998. Do the Alenco windows use your Channel balances? Thanks, Bob

Cannot find part on site

Do you have this balenc rod. 29 6 KX CMC 7 Please let me know Thanks Saleem

Hi, I am looking for the right channel balance for my window. In the old part, it is stamped as 2730F (pictures attached). I was looking at the following link: https://www.swisco.com/28-inch/pd/Series-351-Channel-Balances/S351-28 However, the top and the shoe looks different from the pictures I h ... (cont.)

Can i replace the plastic only

Needs this for replacement

Not sure if the pictures were sent. I am in dire need of new balances on several windows. The metal portion of the balance measures 30" and is about 1/2" wide. The plastic top portion is very similar to part 19-005. It has a length of 1 1/8" and the wings measure out at 15/16'. The bottom shoe is ve ... (cont.)

The only number stamped on it is 2730. It's 28" tall, 9/16"wide, and 5/8"deep. Wings on top are 15/16", top is 1 1/4" tall Bottom shoe is 1 1/16" deep, 1" tall, with no wings

1/2 inch wide 19. Top looks like your 19-005 The stamp reads "19 9"

For window: width 39 5/8" Height 27" Weight 26.2 lbs channel balance width = 1/2" metal part length = 25" Stamped on on piece is 2490 on other piece is 24D Resembles S700 Tim

I fount this channel top balance 19-005 very close to the one I need to replace. As you can see the pics. it has two steps on the upper side no one like the 19-005. Please advise, if I get the 19-005 will work fine? Thanks