Viewing all customer Discussions for:

S380-22 22" Series 380 Channel Balance

Hi I have attached some images of a 2140 1/2 inch Channel Balance which I would like to replace. Which channel balance would best replace this one. The Width of the black piece including flaps, is 15/16", the height is also 15/16" Regards, George

This is a BSI 2120 channel balance that is 22 inches long. I can't figure out which top part this is. Thank you for your help!

One is 22 inch long and the other is 16in long .

Need assistance in ordering the correct Part Number replacement balances for my single hung, side loading window (manufacturer unknown). Balance length is 22". The part number on original balance is "2140" but the Swisco part numbers seem to be different so I'm not sure which one to select. I also ... (cont.)

I need to replace missing window channel. I sent number on channel and picture of whole channel.

non tilt window. channel length 22', channel width 1/2'. Marking 21-1.possible 380 or 385 series? bottom shoes is nearly one inch, 14/16'. The top and the bottom shoe are winged. I am unsure what to order.Actual channel width 9/16'. Channel depth is 5/8'I think the top is 19-005And the bottom sho ... (cont.)

need two balancers; old ones keep popping out

Hi this is MartinThis is the part which I need My client has 5 windows , each one has 2 of theseThe balance size is 22 inchesI checked your website but not successed Please let me how much is each and how many days it take to get

I'm looking to replace two balances for an old single hung Alpine Industries window. It's a half inch width balance with a marking of 2190 on the side. I'd also need the balance cams if they are not automatically included. Do you also need the sash weight? I can get that if needed. ... (cont.)

22" balance 1/2 wide with 2130 stamp. Which balance do I need

The metal bar is 1/2" wide by 22" long, not including the plastic ends. I have more photos if you need them.

I am looking to replace the channel balances on most of my windows as the majority of them are failing. I have attached photos of the balances. There are three window sizes I am working with so there is one of each photographed. The window sizes are (Qty=number of windows): 34"W x 70"H - Qty 10 2 ... (cont.)

Hi, I'm looking for a 21-3 LL5 CMC 9 Channel Balance for a vertical non-tilt vinyl window. Thanks

I have a window channel balance that needs to be replaced. The part number stamped on it is 21 4 CALDWELL IM What is the corresponding Swisco replacement part? Thanks!

No known name on the window just the marking of 21 4 CT CALDWELL on balance.

I recently bought some window balances, S351-28 (2730) and purchased according to the stamps on the old balance. With the old balance the windows would not open unless you wedged a screwdriver under the window and lefted. After you got it to open it went up and down just fine. However if you closed ... (cont.)

One of our windows is missing the channel balances, so I'm not sure how to figure out a replacement. The four other single hung windows in our home use S380, so I am assuming this will be the same. I can also weigh the sash. However, how do I figure out what length the channel balances need to be? T ... (cont.)

Please advise me which one to choose. I found my balancer is 1/2" Wide Channel Balance. There are many variations raging from S350 to S745. I wonder which one I should choose. Thank you Tatsumi

I have two sets of window channel sets I need. The first channel is a 2720 bsi. It measures metal to metal 28" long. THe second channel is stamped 2130 bsi. It measures 22" long metal to metal tip to tip. I am also in need of the plastic stops that go at the top of the window. They are black plasti ... (cont.)

The model number on the channel Balance is 2120. Based on the measurements I took, in order to replace the entire mechanism I would need part "22" Series 351 Channel Balance". But before ordering 8 of these I would like your concurrence based on the pictures I took. Thanks.