Viewing all customer Discussions for:

S380-22 22" Series 380 Channel Balance

the numbers stamped on the balancer are: 1. 21 4 2. bsl 08

Hi. Not sure which part to order. Width is 1/2" Length is 22" Shoe is 1" deep The closest item seemed like the: 22" SERIES 380 CHANNEL BALANCE (option 2140); Thank you!

Channel length is 22" long. The stamp on the side of spring ( 2190T 28 )

Hello, Not sure of proper length/series for the attached balancers. Marking on first pair is 21A, 21B. Looks like Series 800 Channel Balance. The second pair of balancers is marked 3020. The metal part of the balancer excluding the plastic foot and top parts measures 31". Thank you for your help. C ... (cont.)

BEST BUILT WINDOW 23" LONG OTHER MARKINGS 21 2 8SI ML

Hi, looking for two of these. Length is 22", weight of sash is 37lbs. The white end appears to have had side tabs that have broken off. Thanks for your help- Jano

Part BSL 2010 metal part measure 22 inches. I need 2 of those. Part BSL 2410 metal part measure 25 inches. I need 2 of those. I also see you have some thing to put on the worn track of sliding window , it measure 2 windows measure 58 inches and one window measure 53 inches wide , do I need rollers ... (cont.)

The pics uploaded are of a ballast I got from you a few years ago. The window has barely been used, but there seems to be no problem. It has the swisco.com decal on it and is stamped 2110. 2110 BSI VR. This one is in a small sash and is the only one I have found that is a 2110. Some for the saml ... (cont.)

Hi, I need help in getting the correct balancers for two windows. The five photos are only for the first window, which has 21 -3, measure 22inch metal to metal, and the plastic Base measured 1-1/16". I have a larger non-tilt window that completely missing all the balancers. The window has the same ... (cont.)

Channel length; 22"Channel width (at bottom) 5/8" (at top) 1/2"Any markings were barely visible;"Caldwell" and either "21-4" or "21-A". The stamping was a very light ink and almost completely faded.Thank you for your help and reply if more info is needed.Craig

Hello, I'm looking to replace 3 pairs of channel balances on my aluminum windows. I attached 3 images. They are 22" long and 1/2" wide. The number on the Channel balance is 2140, and is located in the attached images as well. Could you please help me identify which parts these would correlate with ... (cont.)

Hello, the balances I need measures 22" long, width 9/16". Bottom of both balances are damaged so it's hard to match up with your drawings. Thank you!

Channel series: S380Channel length: 40Channel stamp: 21DSQuantity: 120Also, looking for 182 each of the 21DS 38"both are Series 380

Slide is 0.5" width (9/16") and metal is 22" long. Markings on Pacific Window slide are: 21 3 CX CMC 7 (see photos)Would want to replace both slides as recommended so want to order two correct slides. Left slide string broke, expect similar wear on right side slide strng. If additional pict ... (cont.)

I have one that shows 21 3. It has wings on the both ends. I believe it is the 15P170 on one of the end as it measured 1 1/8in. I would like to just buy the whole balance with the wings on it already.

I need a replacement that looks just like this one for my window. Please help

I will be replacing a 22" length x 1/2" width Channel Balance for my window that has a stamp marked "21 3 CN Caldwell". Can you let me know which model I should buy as a replacement?Thanks,John

Stamp Number 2130 22in

Looking for a window channel replacement for a 21 4 Caldwell part 46 by 23 window. I need to replace the broken one, plus three others. I also need a replacement for another window that's 35 by 29.

Hi. I need to replace many channel balances from my old windows. I think that they match the model 22" SERIES 380 CHANNEL BALANCE. My old balances have the following code stampped: 2130P. What does the letter P means? Which one should I order?