Viewing all customer Discussions for:

S380-27 27" Series 380 Channel Balance

I am in need of channel balancers for my windows. They are Caldwell # 26 4 JO. The metal portion of the balancer is 26.875". Probably round up to 27". These windows are Northwest window co. out of Spokane, circa 1996. Which I believe are a subsidy of Jeld Wen. They are also 1/2" wide x 1/2" high. Th ... (cont.)

Hello. Here are the details to my balance that I need a replacement for: ? 1/2" wide ? Fitting have wings ? Bottom shoe 1" depth ? 27" channel length ? 26 4 BSL OK stamped on channel

Stamped 26 4 IR CALDWELL. Metal is 1/2 inch wide and 27 inches long.

Markings: 26 4 LV CMC 7 Non-tilt balance window 1/2" channel width Would appreciate guidance on selecting the correct top & bottom fittings. I believe it is Series 380 or 385 channel balances. Also would like to confirm that the correct stamp option is 2640.

Good morning,Im Looking for window counter balances for vertical sliding windows and small steel retainer clips that snap into window frame, both items shown in attached photos. The only numbers, names or markings I can find anywhere on the item are(26-4 BA CMC 7) also shown in a photo.Please tell ... (cont.)

May 30, 2023Printed on the lower end of the window-channel balancers: 26-5 EL5 CMC 43The five attached photos represent one of two two window-channel balancers needed.Total length of both channels, including the plastic parts at each end: 70.7 cm / 27.83 inPlease provide the correct part number ... (cont.)

Please let me know which replacement balance would be best for my window. The current channel balance is 27" long.

The metal part of my balancer is 1/2 inch by 27 inches. The stamp on the balancer is as follows: 26-3 DD5 CMC 87I have included pictures to help you with identification.

Please help to identify this 27" sash part # so I w could purchase 6 from your website. Thank you!

We have KINRO windows that new the balances replaced. The balance have 26-4 stamped on them. The balance shoe is 1 3/32". From your help with others it looks like I will need a S385-27 Balance. I have included a picture of the Top Sash Guide, it looks like a 18-171? And I would like to order severa ... (cont.)

Looking for a replacement for a 26 3 CS Caldwell channel balance. The bottom attachment is marked 15P102 3 S

I am looking for replacement channel balances for my Milgard windows. I've attached photos of the original balances. Here is the text stamped on the inside of my window: May 17, 2002 - MM-CH 031168 004. The window panes these balances connect to are 29" tall x 33-3/4" wide. Could you please advis ... (cont.)

Hello! I could really use your assistance to determine the correct replacement balance for my windows. I have multiple windows that are completely missing balances and some that have failed. This is one of the failures depicted. The other windows are the same size as the one this balance came off o ... (cont.)

need balances

Looking to get replacement balance rods for my Milgaurd windows 1989 vintage. Metal piece measure 27" long w/o the plastic guide ends that are riveted to it. Spring length is 12" long approximately 5/8" wide and 3/4" tall Thank you,Steven

Hello?.can you please tell me the correct balance to order according to this picture?.I provided My part says 26 4 AU CMC 4

Numbers on it says 26 4 jw cmc 11

Looking for a recommendation for a replacement channel that is stamped 26 4 HK Caldwwell. with the photos i have uploaded, i believe i need an S380-27 with 2640 option. Please review and advise.thank you,chester

1/2 inch channel. 28 inch long. Milgard sliding window (non tilt). 26 6 fx cmc 11. Likley 2005-2006 manufacture. Photos & label. Thx.

27 inch channel length. 26.5 JR CALDWELL written on the side of channel. 4 balancers required total.