Viewing all customer Discussions for:

S380-30 30" Series 380 Channel Balance

I need to replace 6 of these balencers. Cany you identify via the photos and provide part numbers so I can order them?

Vinyl Milgard style windows 32x32 & 32x46 in sashes. Double pane window weights are 26.8 to 27.2 lbs. Balance dimensions are 30" length metal by 1/2 by 1/2 width and depth. Old markings (2) are 29 5 KS CALDWELL, (3) are 29 5 FT CMC 2, (2) are 29 5 HU CMC 5 and (2) are 29 5 GN5 (or 6N5) CMC 45. Top c ... (cont.)

double non swing window i cannot identity a replacement. It is 30 in long. No number on anything to identify1/2 inch wide 30 inch long

hello, First of all let me say that you have one of the most helpful websites that I've encountered in the entire field of home repair. Thanks for that. I need to replace the channel balance on a 33" wide sash window. The only markings on the balance are in the attached photo: 29 3 LS CALDWELL. ... (cont.)

Channel length not quite 30 inch

Not sure what length or end style of these sash/balances to order. I need two of these.

Need to find the replacement parts for this item. Also need the top and bottom clips.

Need to order 2 of these channel balances. Thanks, Ron

I'm looking for replacements for 5 windows with this balance. The only markings I can find on them is the 29 3 B.S.I OL. Can you tell me what part I need?

I need these pieces for the support for the channel balance s380 -30 2940 inside de windows.Br Bernardino

I need to replace these balance rods:6 rods 2620 27 inches, 2 rods 2330 24 inches,2 rods 2940 30 inches . I also need ten each of the shoes and tops photographed here.

On half inch wide Measures 31 inches from the top of the plastics tip to the bottom of the plastic tip. Which balance do I need?

There is a number 2990 38 oj BSI

I will need 4 of this balances Thanks

Hello my name is Jorge Blanco (954) 661-6214. I have eleven ES brand Double Hung Impact Windows (heavy). They never worked correctly and the all the balances have started to fail. Some have the DS markings stamped on the balance and others don't ? I have been told that some of these balances may not ... (cont.)

Hi there, I'm hoping you can help me with the replacement part for my window. Please see attached pictures of the parts. The part only lists 2930P, is about 31 inches in length, and half an inch in width. I also added a picture of a window with the piece that is still working and I added another pi ... (cont.)

The balance I pulled out was 1/2 wide and 30" long. The only numbers i saw on it was 29 6 and a trade mark symbol. Picture attached.

29c is printed on the channel balance. what would be the correct replacement to purchase

2930 bsi is stamped on the channel balance what would be the correct replacement to purchase

Channel balance 3440 S380-35 2940 S380-30. Please check if the parts that I have ordered under order number 1382831 are same as those in the picture. I am not sure if the parts that are ordered are as per the specifics in the picture.