Viewing all customer Discussions for:

S380-30 30" Series 380 Channel Balance

The channel balance guide had broken in one of my bedroom non-tilt windows. I found your site online and determined that the 18-161 5/8" Sash Guide Norandex was the replacement I needed. I succeeded in removing the lower sash as indicated in your instructional video for replacing the sash guide an ... (cont.)

I also need clip 18-166 for the window itself

Balance is broken on a window installed in 2005. We have not been able to locate the same sash cam or balance. It is 1/5? wide but doesn?t have a stamp on it. Any help is appreciated!

Number displayed is 29 3 LT CMC 2. I need 1 set Number displayed is 29 6 LT CMC 2. I need 1 set The window uses sash guide 18-166: 5/8" Top sash guide, kinko

Nuair brand 30inches..stamped 29D Do you have replacements? Thank you.

Good afternoon, I am trying to purchase the correct replacement part for my window. A requested in your video I have attached a few pictures and the length of the old part 18 in. Thank for your time.

I have a stamp that may be the sash weight - 29 4 IQ CALDWELL S-380 looks right; 30" definitely right. The shoe at the top in the pic is definitely right (with wings). I really can't tell from the bottom as mine are damaged.

Ordered channel balance 34in series 380 2930 later located stamp on existing channel balance 2940 Will a2930 work reasonably well

not sure what brand of windows these are. House was built 2005 in Crawfordville ,FL Let me know if you have these parts. Thank you.

I need to replace the sash guide - top on a kimco window. I replaced the Channel Balance with your 30" Series 380-30 Channel Balance option 2940. I also ordered the 5/8" Sash Guide Howmet 18-018. They are not the correct guides. The old guides are 7/8" wide top, 5/8" wide bottom and 7/8" from bottom ... (cont.)

Good morning, I am uncertain as to which replacement channel balance I should order. I measured the metal portion of the channel and come up with 29 3/4 inches. The number on the channel is 2940. I removed the sash and it weighs 25 lbs. According to your excellent website, it is the correct number f ... (cont.)

Need a new one

markings: 29 3 JW CMC 11

4/9/2020re; Side Load Single Hung Window Balance SpringI have a home with Nu-Air single hung side load even split windows. On a couple of the windows the balance springs have failed and require replacement. Can you provide replacement balance springs for these windows? The spring is stenciled with ... (cont.)

29-9 AA CMC 11 29-9 BA CMC 11

Hi,I have broken balancers on some vinyl windows. I have included photos including the markings on the metal.The metal part is 30 inches long and 1/2 inch wide.Do you sell replacements for my non tilt windows. I watched a Milgard dyi balancer instal and it looked just like mine.ThanksDoug ... (cont.)

I have a broken Block and Tackle Sash Balance. I have Philips Stayton Windows in my condo which were manufactured in 2007. I attached a photo of the balance for the working window however the broken second window I'm not sure I can get back in place again if I take it out. I measured the Block an ... (cont.)

I need to replace 2 Caldwell 29 3 GO CALDWELL window balances. What part do I order?

the balance or balances I am looking to replace are 30" long (metal u channel) and the markings are 29 1 bsi mc. Can you help?John

I want to replace the channel balance'rs on two ALCOM windows installed in 1992. Visible code 2930 AB. Here's a pic. Window size is 62" High and 52" Wide. I appreciate the help