Viewing all customer Discussions for:

S380-33 33" Series 380 Channel Balance

The channel balances on my windows are old and need replacement. There is no part number on balance but found sticker in top of window. Also need the sash cams? Plastic pieces. Appreciate help on identifying replacement part numbers. Milgard Window weighs 15.5 lbs DH-R20 Mil-027-1-1 Series 1510/1 ... (cont.)

Hope you can see the stamp on these. Our windows weight from 18 pounds to around 30 pounds. They're all the same length but different widths. Not quite sure what to get. Thanks.

Old and broken unit is 33" long not counting the plastic end pieces. There are no markings/numbers on the metal part of the channel unit. Sliding part of window is 46" wide and 36" tall I need to know what new channel item to order.

I have 33 inch long channel (excluding end plastic pieces) by 1/2 inch wide, Non-ribbed channel Winged at top and bottom bottom wings seems about 1 3/8 inches Weight is 38.5 pounds Marking is 32DS of 39 The way the top of the spring clips into the top seems different that your pictures for the S ... (cont.)

32-4 BH5 CMC 75 Metal channel is 33" long not including the plastic ends

Balance is 33" long

Hi There, Trying to find replacement balances for my Milgard Windows. The balance I have is stamped 3230 on the side. Thanks.

I need to order 6 complete assemblies with top & bottom shoes. Here is the channel info.Window Sash (Spring loaded) channel balance for ALUMINUM Pull-UP WINDOWSSINGLE HUNG PART #3250 BSI MD33 IN LENGTH9/16 IN CHANNEL WIDTH5/8 IN DEPTHNumber stumped on the part is 3250 BSI MDThe original window ... (cont.)

Identifying numbers printed on the unit: 32-3 FA2 CMC 19The metal channel is 33" long, the back of the channel is 1/2" wide, the open side of the channel's slot is 9/16"One side of the window is also missing the little clip that pops out to catch the channel balance so that it can be removed. Fortun ... (cont.)

I need four of these channel balances Channel balance - 32 4 CX CMC 7

Hi,The subject item on one of our windows has broken and I am looking for a replacement in pair but having trouble to find the right part. The house was built in the late 1990/early 1991. Please take a look of the part number (32 3 JJ Caldwell) on the first photo (track1.JPG), which I can't find in ... (cont.)

im looking for new sash balances. They are for a window that it approx 45 pounds, the ones that were installed are too weak and the spring broke. The number on it is "3240", so i would need the next "step up" for weight, these were replaced before and failed. The channel is 9/16 wide, and 5/8 deep, ... (cont.)

Hello , Can you please help me to find a replacement for my Caldwell Channel Balance. The channel balance measures 33 inches long and the stamp on the balance reads 32 5 GP Caldwell. The balance top on this channel has a groove in the middle.

Hi there, My window had recently broken due to one of the balancers string not working. It would be great if someone could help me find the correct replacement balancer for my window. All of the specs and information will be listed in the photos. Thank you.

Clip that is used to remove S380-33 channel balance Plastic clip that holds balance in window frame Locking Mechanism These are Anderson's retrofit windows

I have a Milgard aluminum window. The balancer marking says 32 3 HJ Caldwell on it.The metal portion of the balancer is 33 inches and 1/2 inch in width.Glass in window is 19-1/4 X 33 and outside frame of window is 35-3/4 X 22Like to replace both balancers, all attachments and purchase the rivet to ... (cont.)

32 4 LN CALDWELL

Looking for replacement channel balances for our non-tilt vertical sliding windows. The length of the metal is 33". The number stamped on the balance is 3230.

Would like to replace a broken channel balance. Builder used Alpine window. Window # 152-502153 Channel balance # 32-2 BH5 CMC 75 I don't know what would be the SWISCO number.

Hi there, These are stamped as 32 3 DR CALDWELL. Any suggested product(s)? Thanks