Viewing all customer Discussions for:

21-002 Bifold Door Pivot Pin, Benchmark

I have these really old bifold doors and need parts. Unfortunately, I've no idea of the brand or model. I'm looking to buy the upper and lower pins for the open side of the doors; I've attached pics of the parts I need, as well as the inside of the door. I see some similar parts on your site but wou ... (cont.)

Hello Swissco. Need floor track,looks like a two-piece system. The pictures attached may need a different angle to view properly. Thank you for any advice on this issue.

These are what I think to be Leigh 70's era bifolds- looking to find similar parts and tracks for identical bifolds in another room (for a 10' opening) which were completely uninstalled and are missing all hardware, including original tracks

Our contractor accidentally tossed the lower track for our bi-fold doors. Help!

First picture is the top track. Second picture is a different bifold closet door to show the bottom tracks installed in other closets in the house. The doors and tracks are probably 40 years old. Track is not available to look for name or numbers. It is 48 inch length. The picture is of a similar ... (cont.)

Hello I'm just not one hundred percent sure what part this is at the top it looks like some type of clamp but I'm not sure this is on the bottom of my benchmark bi fold door I'm ordering new ones thank you!

Hello,I want to replace all hardware of my metal bi-fold closet doors in my house, and need help to identify what they are. Thank you,Lei

I need to replace the pins in both bottom and top of my closet doors. I c cant find replacwment parts here locally.

I need a replacement pivot or a replacement track.3 ft track 2 very heavy MDF Doors or a replacement track that is 36 inch long, 2 inch tall and can support 2 heavy MDF bi fold closet doors .

No markings

Need the parts that are in the images for an Early 70s bifold mirror door. No mfg stamped on door.

I am looking to replace the tracks, pins, and all other hardware for all the closet doors in the house my wife and I just purchased. The house was built in 1958 and has the original closet doors, and we expect the original mechanisms. I have had a really hard time identifying and finding the parts t ... (cont.)

this is my full vu door parts are in good condition could use a set of new caps for the pins and possibly the parts that are in the track that the pins go in so they look new i dont understand what the door is called, i can read igh not sure if that a B or a D lol

I need four to six sets of double bifold door hardware for approx. 1970's Float Away budget bifold doors.

Greetings.. I have two metal bifold doors that are hurting.. the start of the issue is that the wood tracks are fully worn and the pins will not slide. Yes wood, there was no metal in the track. House built in the 70's. Both are 6" wide, 7' 4" tall. Half of the hardware is swapped out for simple bol ... (cont.)

I recently purchased a rebuild kit for ~1980s mirrored closet doors. I cannot get the pins to stay in the pin caps as the pins pull out when opening/closing the doors. I reversed the spring tension on the doors(top: push up vs pull down to engage pin) and the pins still will not seat in the cap. ... (cont.)

Dear Sir,We are doing renovation on multiple apartments with older metal bi-fold doors. The hardware for most of the doors needs to be replaced. I have attached pictures of one set of doors and the existing hardware. I do realize that most of the nylon bushings are missing and the pin in picture #14 ... (cont.)

Bifold mirror doors these are the 2 openings. Are new tracks are available for these doors? We're switching to white marble tile floors and we want to, if possible, embed the the track into the floor. Two openings:72W x 80H 60W x 80hAfter measuring our pins the adjustable threaded anchor pin is a 5/ ... (cont.)

My name is MonicaLooking for this bi fold door pin

Looking to find this. Joe