Viewing all customer Discussions for:

S390-29 29" Series 390 Channel Balance

Have Jordan Windows, Series M21, 386G. The Balance Number is 2840, the top is similar to a 19-002, but I don't have any bottom shoe to compare to. Also need a similar top sash guide, i can send dimensions if needed. Please let me know what other information you need.

Window tracks 29"length. 1/2 wide. Number on metal is 28A

The length of the metal part of the balance is 29 inches and the total length with the plastic tips is 30 inches stamped 2840 ha bsi

I don't know anything about channel balances, the only identifying marks on this challenge balance is #2820. I need to order two channel balances with all needed attachments, caps and springs included, how much will that cost me?

Can someone suggest the right balances needed for my sash windows. Note, I'm a new owner, and have very little history on the property. The present balances may not be the right size. Window sash channel balance needed:(2x types) -Stamped model number: 28 3 EK Caldwell -Window is 19 lbs - ... (cont.)

Trying to find this channel balance. Jordan Windows evidently out of business. Only number I can find on the part is 28 3 EJ. Please help!

I ordered series 800 balances . The attachments looked right but the balances are too thin to stay in my window. Can you tell me which balance I need? Some are stamped 2840 and some are 1640.

This is from a non-tilt Jordan window. The windows were installed in 1995 and as you can see, have given up :-( These are 29" long (metal strip only).

I need L/R Balances. My Parts are: 29" Long-just the metal channel The stamp on side is 28-3-EO

Number on balancer is 28 3 Co Caldwell. The length excluding the plastic ends is 28 and 3/4 inches. Thanks Larry P

Hello, I need help identifying parts for a window balancer for a Florida Extruders International - Milestone single series 1000 window. It appears to be 30 inches from one end to another with the"UB 28D" marking on it. I have attached pics and can provide more if needed. Thank you ... (cont.)

need two channel balances for a no tilt window, channel balance marking is 28 4 EP Caldwell, metal length is 29 inches. I can not differentiate top or bottom shoe by examples in your website. Pics uploaded are top and bottom views (both front and side view)

My balance reads 28 3 but measures 28-3/4". What do I need? Can I just use a stock balance? I don't want to go through the custom process, so frankly, I'd be willing to fiddle around to make a stock balance work.

The cord on one of my channel balances broke, and the plastic at the top of another channel balance is broken. Can you tell me which balance and top I need to order based on the photos I attached? The channel is 1/2 inch wide, and the windows are non-tilt. The channel is stamped with "28 3 CALDWE ... (cont.)

I think this part is perhaps a Top Sash Guide. There is no part number on it. I ordered the S390-29 Channel Balance to repair my window and I?m needing this top sash guide as well, just not sure which one. I?m not sure if this helps or not. Thanks.

Based on the attached photos and the following stamp numbers, one of your representatives recommended I get the series 390-23 and series 390-29 balances. 22 2 CT CALDWELL and 28 3 FT CMC 4 I measured the shoe and confirmed that it was 15-001. I received the channels yesterday a

Hi, I don't know the brand of window but I took photos of markings (2840Y). It is a 1/2 inch channel and 29 inches long. I am including some photos with identifying markers. Please advise.

Need replacement balance 24" options stamp 2420

I think I need an S350-29, but I want to be sure.These will go into an All Seasons window. Thank you, David

greetings ...your staff do a great job explaining how to identify the correct balance...looks like I'm S390-29 with 2840 option. if you would take a look and confirm then I'll order immediately. Thanks Attached some PDF photos: *1/2"wide channel *29 " long *the shoe appears to over 1" wide ... (cont.)