Viewing all customer Discussions for:

S600-29 29" Series 600 Spiral Tilt Window Balance

Unsure of model or year (another window from same era shows "Series 151 on the NAMI sticker). Need a shoe and 2 spiral balances and need to identify which replacement part would fit. Spiral balance Length: 29" Tube diameter: 1/2 or 5/8 (a bit deformed) Color: see picture

Looking for replacement spiral balances. Currently looking in to the Series 600, however, the tip length of the original is a concern. These are tilt windows and the original balance diameter is 3/8"

I have a 5/8 barel Chanel balance the barrel is 29 inch long with black tip 2 pin design one pin missing they are new jeldwen impact windows need replacement

My balances are 29" long with Blue tip See pic. My pivot shoe is 2"H x 9/16" thick app and 1 1/8 wide app. the 1 1/8 isn the app with of the channel. i haven't removed anything so I can t get exact measurement. i hate to remove them until I have something to replace them. I'll have to cut the ... (cont.)

I need to replace the spiral balance on casco single hung tilt windows. Do they use the 5/8" diameter? They have red tip and were 29" long

Dear SWISCO Experts, Can I ask your help for identifying the window spring? I have non-tilt windows and I think I need to replace the spiral window springs. I have multiple windows that does not stay up. The length is 29 inch, upper side diameter is 3/8 but the lower side of the pole has some meta ... (cont.)

Looking for the Swisscom part number for the black cover that sits over the top of spiral balance in my double hung tilt window. The spiral balance is equivalent to S600-29. The dimensions of the black cover are about 3/4 in Width x 1 7/8 in Length x 9/16 in Depth.

Here are some photos of my balance including a code of ( D V A 1) on the side of the 29" tube. The full length with the spiral Extended is 58". I am trying to determine the tip color and wanted to see if you agree this is a yellow tip. Please let me know.

I ordered two S900-28 from your company and upon installation, the spiral rod pulls completely out of the metal tube when the sash is closed. There is about 1/2" space between the bottom of the metal tube (not the yellow tip but the aluminum tube itself) and the spiral rod where it has pulled out of ... (cont.)

I am ready to order a 29 inch spiral tip window balance. Part S600-29. My current windows have a black plastic part at the top of the balance. the balance is inserted into this black part and all held together with one screw. I dont see this part on your website. I have attached pictures. One i ... (cont.)

My Window will not hold up and slams closed (Home Built in 1999). The cork-screw like balance is 28.5" long (white sleeve part) plus extended probably double that if you count the cork-screw part coming out of the sleeve. I'm guessing if the window doesn't stay open then both sides need to be repl ... (cont.)

Looking for 3/8 spiral balance for tilting window. The metal measure 27.25. They have plastic cover on them that measure 28.5. The connector color looks to be white or light yellow. Which part number and length do I order?

Previously Purchased the following for Kinro 4050 double pane windows. S600-29 : 29" Series 600 Spiral Tilt Window BalanceThe S600 Red is too large of a barrel and does not fit. Which 29" Balance would be ideal?Thank you, Steve

I'm having trouble finding the right Tilt Window Spiral Balance. The tip on my current widow's spiral balance is white. The tube is 29". Most of the ones I'm finding don't have an option for a White tip. I took 2 pictures. One is of the tube with the spiral balance and the other is the Spiral Ba ... (cont.)

I hastily order what seem to be incorrect parts and are returning them for refund. I need guidance on the proper parts. 1 - Pivot Shoe I think I found correct one (your part # 15-046) mine pictured in 2 inches H, 1 1/4 W and 1/2 inch thick. 2 - See photo of the spiral balance - I purchased your S9 ... (cont.)

29" length, looks like red tip9/16" width of outer partWould like to know what series it is to replace the old one

Not sure what this is called. I need 2

Hi Steve, I am looking for some replacement parts for some TRACO windows. I know that I need some balances but what I need your help with is identifying the tilt release latch and the part that holds the window in the frame on the side. It looks like over the years, they have just pulled real hard o ... (cont.)

The home was built in Florence, KY. between May thru August of 1993. I would like some help identify the parts need for repair. The spiral balance plastic tube is 28 3/4" long with a blue tip. I took a picture of the plastic piece that the spiral balance attaches to in the window frame. I hope this ... (cont.)

1/2 inch by 29 inches long with orange end