Viewing all customer Discussions for:

21-250 Spring

The top pin cap broke. The doors are at least 20 years old. Mirrored bi-fold doors. Diameter of plastic cap is 3/4". The hole in the bottom of the cap is 1/4". The pin is 1/4" x 4" long. Hoping you can help me find what I need! Thank you

I am looking for the top stationary pin for my bifold doors. The pin could be a 1/4" diameter or less with a hole for a keeper/retainer for a spring.

The pin is approximately 4and a half inches long. It may or may not need replacement as the problem is that it does not engage the top track so there is a slight swing in and out when opening and closing the door. Any assistance that can be provided would be greatly appreciated.

I am trying to fix some metal bifold closet doors, but the attached pins are missing on a couple of doors I need to fix. Will your hinges replace these okay? They are very similar but slightly different. Here are the parts I see: 21-007, 21-001, 21-065, etc

Hello, I am looking for replacement parts for my closet bi-fold doors guide pins. The doors are metal These have been left as is since the house was built in the 70s. I do not know the door manufacturer. The pin diameter is 1/4". The nylon cap diameter is 3/8".

Trying to figure out these parts for metal bifold doors

I am looking to replace all the mounting hardware for my 96-inch bifold doors 1975ish (full-vu. Model 8433 Serial 861097 I just want to make sure I get all the correct parts or any missing parts. If any kits work, I have no problem replacing the tracks. Thank you Paul

One of the bifold doors hadn't been working. In continuously lifting it up to close it I bent the top pin (the one with the spring). The door came off and comparing it to the one on the other side I definitely need the plastic "thing" as shown in picture 21-058. The only thing I see inside the doors ... (cont.)

I have a few sets of bifolding doors that I need lower replacement parts for. The current parts and door photo are included.

Hi, We are looking to replace hardware for our metal mirrored bifold closet door 3' opening. Attached is a photo of some of the hardware pin & slide. The door has to tracks top & bottom and was installed in the 1980's. Thank you. Rodger & Ivy

I would like to know if you have any lower guide pins that are spring loaded that will work as a replacement part for the lower track guide pin. I have previusly ordered 6 Swisco 21-049 parts (Order #2283017). Would the 21-091 spring loaded top pivot guide pin work in the lower track as a lower guid ... (cont.)

I have 3 sets of floor to ceiling metal bi-fold doors and need replacement parts. Please view the images. There are no markings on the doors.

Hello, We are struggling to find replacement pins for these 60s bifold doors. Pictured is the lower fixed pin. Helpppp!!Thank you, Alex

Hi, sorry I don't have better pucs at the moment. I was hoping you might be able to ID the door from these lower guide pin pics and provide a parts list for all the hardware. Or maybe point me in the right direction for how to ID them, I couldn't find a brand or anything. My parents and several of ... (cont.)

Give me a Quote for 10 GUIDE PINS (5 1/4" x 1/4") and 2 Pivot Pins ( 5 1/4" x 1/4") ASAP. Thank you, Bobby

To whom it may concern: I am interested to buy the spare parts for a Strato Folding cabinet with serial # 38260. I need the kit following: BM-1 - track block BM-2 - Bumper BM-4 - Upper pivot pin BM-5 - Spring BM-6 - retaining ring BM-7 - retainer BM-8 - retainer screw BM- 9 - Upper and lower guide p ... (cont.)

I need to restore a total of 4 doors. Need all hardware: Guide Pins, Pivot Pins, Pivot brackets etc. Door manufacturer unknown. Help.

We have 3 bi fold doors that need repair and one double bifold door that needs repair.They all need new stationary pins, plus the pins with the springs. the double bifold door keeps opening off the track, not sure if it piece that runs across the track is too short.Do we need two pins for each stati ... (cont.)

Need replacement bottom pins and a couple plastic sliders for the bottom rails. Pic1 shows top pivot pin (which I have all of), pic 2 shows bottom of a door, pic 3 shows the one bottom pin and the plastic slider that it snaps into. The rail is at (or just over) 7/16ths inch wide. The pin is 5 1/4 ... (cont.)

My door fell off the tracks and is not staying on the track. not sure which pins to purchase to repair. The door has a label that reads: Full-Vu Folding door Leigh Products INC. Coopersville Michigan