Viewing all customer Discussions for:

33-072 #8 x 3/8" SS Pan Head Philips Screw

I'm trying to repair my elderly neighbors vinyl window that won't stay up. One coil, on the right side front window, is broken. The coil on the left, front left side of window, has a kink in it and is ready to break also. I haven't been able to find out the manufacture of the window. I've removed t ... (cont.)

WINDOW CRANK HANDLE, 30614 30893I would like to know if you have the hardware for the above casement window. It says 1986 also under the above numbers. Are there any other identifing numbers I'm also looking for the 2 levers that secure the window tightly closed. Also I have a seal failure can I re ... (cont.)

On a double hung Wincore window. Has a 6R stamped on it. Need to know what part number I need to order and what pound it is. Thank you.

Can you please tell me if these parts could be replace

My window right side of coil balance was broken, and I need to replace it. Here is my window model info- Silverline CPD# SIL-N-5 8501 double hung vinyl dua glazed 18892216*1*5*1.2 It was installed in 2011. If you could help me to ID the replacement part, that will be great. Thank you so much!! XG ... (cont.)

How can I know which springs to order for my window? It is a vinyl replacement 24 x 46 in size. Both coil springs are broken.

Hello, I'm looking for some spares of this assembly. From what I've found on the site, it appears that the 15-177 coil balance shoe will work. However, I can't determine the coil spring balance weight. I see a "6K" stamped on the end of the outer spring. Thanks for your assistance. ... (cont.)

I'm looking for the old style coil balance - size 'F' like the one in the pictures. Do you have anything like it, or a replacement? I don't need the pivot shoe just the coil balance.

Hi coil broken and i am not sure which one should i get. thickness of the coil is half inches but what should be the correct length? attached my broken coil and window plastic parts are in good condition. i think i just need to screw the new coil thank you for your help

This spring broke on the left land side of a window I had installed by "Window World of Connecticut a cuple years ago. I am unable to locate the part locally. In one of the pictures there is a very small etching on the white plastic that .reads "13". This part appears to be a single spring and it ... (cont.)

Hello hope all is well I'm looking for this part for both side R &L with spring . Thank you Exp-pro glass

I have taken 2 pictures that show what I am working with. I believe by appearance and measurement that the "shoe" part of this assembly is possibly 15-175. I have not discovered any identifying markings on the windows. There are straight pivot bars at the bottom corner of each window measuring appr ... (cont.)

The only number I see on this part is the # 6, there are no other markings. if you have themI would like to order 4 right and 3 left thank you.

Need to replace this double coil balance. They have letter code rather than number. Cover says G & H but coils themselves are H & HL. I cannot find an alpha to numeric conversion table anywhere. ?? G = 7 and H = 8 ?? Assume the "L" in HL means long tail as it was the upper coil. I will need th ... (cont.)

Hi All, I need to replace the coil balance shoe in my window. I purchased a replacement shoe (15-177) and a set of replacement coil balance springs (S152-6, see photo). The old springs have a notch that causes them to connect to the shoe. The new springs have a hole, but how can I fasten the new sp ... (cont.)

I tried Swisco's 38-036 reverse mount casement lock but it doesn't fit. It's to big to fit into the space. Any ideas?

looking for replacment parts for windows.Thank YouDan C.

First photo is left balance unit in a window that works. Next 4 photos show right and them left in window that won?t stay open. Seems like there are 2 coils on each side but one on each side is disconnected. On left side there look like a half round metal clip. It is broken off on right side. Windo ... (cont.)

this has a coil spring and as you rotate the window it lock the slide, put the window back in position and the whole assembly moves. Not sure if the slide needs to come out with the window.

Hi. I believe the manufacturer of a window for which I need a replacement part is Philips. House was built in the year 2000. Basically, I need to replace the latch mechanism, because the threads for the mounting screws have gotten stripped. Do you sell a replacement for the latch mechanism (shown ... (cont.)