Viewing all customer Discussions for:

S180-07 7 lbs Series 180 Coil Balance

Rotator coil balancer window, American craftsman number seven on the old balancer

I am looking to replace two coil spring balances on a window that is 24 1/2 x 36 and three-quarter tilt in double hung. The sash size is 22 1/2 x 18". I would see the approximate weight is about 15 pounds. This coil spring wraps up inside the pivot shoe. I don't see any stamps on the spring. ... (cont.)

Hi, I took out the parts from my window, and they have patent number 5.353.548 on them, which I saw on another post are your parts 15-086 and 15-087. The markings on the springs are: 4 38W 7 30W The windows itself weighs 21 pounds. Can you help me with what springs I need? I've attached pictures. T ... (cont.)

Have 2 windows where this has come apart from tilt out window. Can it be replaced if broken? What would a good replacement for it be?

Need your assistance in finding replacement coil balances for my Jeld Wen Premium double hung tilt window. Jeld Wen advises they discontinued my windows and no longer carry replacement parts. The coil balances are mark 6 & 7R and 6 &7L. They are approx. 0.56" thick and 1.25" wide. ... (cont.)

Hello. I am hoping you can help. I have a Northeast Windows 30.75” double-hung with tilt latch and coil balance system. The coil balance spring is broken and is stamped with a 7. Could you please confirm the specific coil housing/coil needed? Also, the mounting bracket as well since one if th ... (cont.)

A broken casing and spring identifies as 7z. Punched on it. I am not sure what the z means. I need a pair of springs and their cases.

need a replacement of this part

I need this balance

Hello!I am hoping someone can help me pick out the replacement parts. I need for my Silverline windows. Please excuse the dirty photographs. I tried to include the sticker that may have more model information, but admittedly it is a bit aged. The windows are probably about 15 years old. As it stan ... (cont.)

Can you tell me which part I need? Thank you

The window springs are 9/16" thick, 1 3/8" wide to fit the tracks. The corner latch wraps the side.

I have Traco Vinyl Double Hung replacement windows purchased in 2000. One of the coil balances broke. I believe I need a 161 Roller tilt cartridge but I dont know which pound rating I need to order. The sash size is 18" W x 28.5" What pound rating do you recommend?

I have included the window photo, balancer photo, and serial sticker to the window. We need a replacement balancer. Can you assist thanks.

Window weighs approximately 13.6 pounds

The parts are for Anderson Silver-Line windows that are 10 years old.This appears to be a combined unit (spring and shoe) where the spring has broken. The clear plastic triangle shaped piece is what holds the spring in place mid-frame.Please note the "7" on the shoe. These windows use 2 per sash; on ... (cont.)

Please provide link for the pivot bars & coil springs (7R & 7L) shown in attached photos. The tip has broken off on another window which has the same type of pivot bars. These windows are double pane and they swing to open and I would like to purchase some pivot bars & a set of 7R & ... (cont.)

Hello I need parts for Crestline windows.

The spring broke on one side, on the coil it says 7 35x. all info is on photo I sent you. how do I find replacement part I need for one whole side of window.

Need parts for American Standard 50 series window