Viewing all customer Discussions for:

S795-21 21" Series 795 Channel Balance

I am looking for a custom balance order. Balance measures 21" long. Sash weighs 28.6LB. I need a quantity of (2).

HELP..KEN

Doesn't look broken but is immovable or locked. 21 inches channel, 1/2 inch in width and depth. Marked 20 - 5 RM BSIM. Dash is faint and may be only from use. Was able to easily lift the two of them from both sides of window without removing window panes.

There is an "MM" on the spring pulley 20 9 and FL. BSIN. On the back metal PAT 610108 on the catch part Total length is 22"

Hi, the stamp reads 20 11 HP on my channel balance.its 21" long, 9/16" wide and 1/2" deep.Which channel balance do I need ?Thank you for your helpRobert

On my balance (series 795 ) it has ingraved 20-7.I know the 20 means 21" But,is the 7 the weight? If so, would I just order the standard?

The metal part of the balance is 21" long. It has a string coming down from the bottom of the metal part to the pivot part that the window bottom fits into. One of the pictures above shows the broken one with the string loose from the pivot part. The top screw holding the metal part is 3 1/2 inch ... (cont.)

I need one of these in 27 inch and 2 21 inch. The 21 inch has 21d stamped in it The 27 inch has 27c cj stamped in it

1796103?1?2?1. 2 Balance 21" long 1/30 DS clear

No markings found.

Window sash weighs 30 lbs and is a tilt window. Total of 2 windows and need 4 channel balances. They are 21" long. Can you please provide a quote for these replacement parts. Pictures of my balances are Attached. Thank You.

Hello,We are confident that the S795-21 will work in place of the balance that works with this shoe as long as you measured the metal channel and chose then 21D stamp based on the stamp on your old balance. You may want to switch the shoe that comes with the S795 balance with our 15-195B shoe with a ... (cont.)

Need replacement parts for 13 year old, single hung, vinyl window with tension string balances. Manufacturer is most likely Plygem. Channel balance stamped with "21D", "BSI", "RL". Shoe is stamped with "PAT AB 10106"

Window sash weighs 30 lbs and is a tilt window. Total of 4 windows and need 8 channel balances. They are 21" long. Please provide a quote for these replacement parts. Pictures of my balances are attached.

trying to locate these springs that go on the sides of the window that helps the window open and close. There is a number on the metal 21c bs(i or l or 1). the metal part is 21 inches and the round end is 3/4 " long and the hook end is 5/8". Complete total length 22 1/2"

I have two balances per window. Windows are tip outs. I ordered from you. I received my order and they are 795, 21c. What mine have are 20 e. Will the 21 work. I'm told that you don't have 20e. They will need to be custom made. What will the cost difference be between the 20 c be. ... (cont.)

i need to find 5 replacement channel balances. 21" long rick

Hello, The balance I need is a plain channel block and tackle for a tilt in window. I'm pretty sure I need a 795 channel balance. I'm not sure about the length. depending on how I measure it it could be 20-22 inches. The stamp on the balance is 20 9BSI. I think that means that I need a 20in ba ... (cont.)

how do you find out what weight the balances are. i have stickers that have an A and 1B on them.

We need 2 series 795 balances 21 inches. The old balance is stamped 20-9. We took the window sash out and weighed it. It is 31.1 pounds. Is option E strong enough for it Thanks.