Viewing all customer Discussions for:

S795-28 28" Series 795 Channel Balance

I need a 795 series 28c with the 15-198 clip. 2 of them. Could you please send me a quote. Otherwise I can just retie the original clips onto the new parts if it's more expensive. Thank you

Let me know if you need more pictures or measurements. This is for an average sized window. I have measurements for that as well if needed. And I will need 4 of these balances.

I am writing to request a quote for a custom sash weight balance.The specifications for the balance are: a weight of 10 lbs, a length of 28 inches including the swivel mechanism, and a length of 27 inches without it. I need one balance in total.Please let me know the cost, any associated shipping fe ... (cont.)

I need the S795-28C with the 15-198 hook at the top and a 15-194 one inch shoe. I need 12

Lower Nylon glide broken need entire replacement Window Balance Channel

Thanks for Your Help! I am fixing my window and this balance is broke on the other side of the window. I need to know were to buy one. The metal is 28" long .5" wide and .5" deep with the "end" connector shown in uploaded photo. Thanks!

Need this part for my windows. Will not stay up to keep windows open. I do not have one that is not broken. Attached are the pictures of the ones I currently have. I will need 10 replacements. I have 5 windows balances that are broken

Looking for a replacement for a channel balance. It is 28" length, 9/16" width, and 1/2" depth. The hook is on the top. Stamped 28C. It needs to work with a 1" pivot lock shoe such as 15-194.

I found what i belevive stamped on the balance is "06/3 UNIQUE 27-C-30"

I am looking for channel balance and pivot bar for several MW windows. See attached. Thanks! John

Need to replace a 28" window balance. Spring loaded Hard to read but marking appears to be BSIN 28C

I am confident I have the S795-28: 28" Series 795 Channel Balance. They are stamped 28C. My question is mine have a hook at the top. Can you provide a recommendation to replace mine? I am also not sure if the included shoe from your 28C listing is the same as mine.

Block and tackle parts broken/inoperable. Six windows with measured length of balancer assembly of 28.5". Sash weight is 20 lbs.

Not sure which shoes part to buy

Hi, I need to order 2 custom window balances. I need balances S795-28 "G stamped" rated weight if possible, with 15-194 shoes and 15-198 clips. Can you write me a quote and send a link to order from?

I want to replace windows parts that my house built on 2009. The information I have is Milgard Windows double hung window. My question is,What series is this part? Can I get it? Can you shipping it to Japan?

Hello, I need assistance ordering the correct window sash replacment balance.Attached are photos of the discontinued existing crossbow balance. -Single hung sash measures 33" wide × 30-1/4" high and weighs 18 pounds. The sash thickness is 1-1/4" -The current bottom shoe width is 1-1/4" -The screw w ... (cont.)

I need new Balances and top tilt latches.

These lifts are on my Pella vinyl tilt window. The sash weighs 39 pounds. I would like to replace both balances , Slide blocks and metal pivots on sash could you please help me with the Part numbers thank you Brian

I need 26 of these balances 28C; the balance is 28" long. Can you supply the top clip shown in the photo? Do you have the 1" balance shoe with an open top available? I attached the pivot pin that is on the window now-it is 2.5" long. If you only have the closed shoes available, can you recommend ... (cont.)