Viewing all customer Discussions for:

S795-34 34" Series 795 Channel Balance

Have purchased these parts before, but now the 34.5 inch size not listed. Can I still get these?

Help -I think I need a Series 795 cross balance. 34" new. Old one measures,(34.5"). The "T" on end measures 1 1/4". Sash weight is 30#. The screw holes on the "piece "that mounts to top of Sash,measured 1 3/8" ,( center to center).& the screw plug,(26-200),+ the screw; for TOP mount. I ... (cont.)

Thank you for this site and for the option to post questions. I have twin seal single hung windows that have "MW" stamped on the latch. I'm not the original owner of this home that was built in 2001. Today there was a loud noise and I found the clip latch that creates spring tension broken at the to ... (cont.)

Hey my name is Fernando I order balances for you guys before and now I am looking for 34C And I am including pictures of the balances

Window(s) are believed to be M&W circa 2005. Then are single hung with tilt. The two small parts pivot and attachment around pivot that balance spring attached. The balance sheathhas number 34C pl BSL or BS1. Sash will not stay up and I need 8 of each.

I had previously purchased several of these and been very happy with the replacements in my Joffee windows. I came back to purchase more and see that you no longer carry this item in the 34.5" length. Your suggestion seems to be replacement with the S795-34 as well as replacing the pivot bar. How ... (cont.)

Need to order balancers for tilt sash windows like in the photos. I did find something similar but the top of the balance is different from the one I need. Do you have anything that has the hook like mechanism thing at top?Thanks!Kristine

I am in need of 4 of these or parts to repair. I believe mine are the 34.5 length but they have black shoes on them. They're 15/16 wide. I didn't see that you had that specific one on your website and I didn't want to necessarily purchase the red one that you show in 15/16 since I couldn't find t ... (cont.)

My current channel balances in my windows are 34" long (34D) but 7/16 wide instead of the standard 9/16 (1/2" conversion). So my question is, is there a comparable piece that I'm not finding? I've searched a lot and can't seem to find the right sizes.Thank you in advance!

I had ordered your 34.5" Series 850 Crossbow Balance and later found out you no longer carry this item. What would be a upgrade that will work without changing the pivot bar? Could I use a channel balance, and attach a t shoe to it? The balances were on the website and ordered, then I received a ... (cont.)

Looking for this part. Window balance with spring and all plastic parts. I believe its from a M&W HM manufactured 2006 window. bought out by ply gem. Window is 71 inch tall. I cant find the model or any serial numbers. Seems all stickers where removed. Thanks

How and where do you measure to determine what size shoe to purchase?

the metal tube measures 34 inch by 1/2 by 1/2 the shoe measures 1 1/4 by 7/16 by 1 3/8 tall the question is will the part number series 795 work for what i need

This is the window shoe lock for the balances. I need 40 as they all broke! Can you believe that? 40/66 are broken. I can send a pic if that help. Plastic is green and the base is 1 inch wide

I have about 9 or 10 Windows that need to have the Channel Balances replaced or repaired. Some of the little plastic rollers in the block and tackle devices are broken causing the lines to stick instead of roll freely and manipulate the springs. The channels and the springs appear to be in good ... (cont.)

I ordered 32 of your Series 795 balance for a job I'm doing. But it won't fit. The shoe is too wide, and the balance is wider than my customer's original 1/2" width. What do you suggest?

Hello I need 2 S795 @34F counter balances. Could you please let me know if you can do this. I am purchasing 2 other balances 28D

Liberty patriot window balancer. One right one left. Number stamped on metal part is 34C. BS

I am trying to order the correct window channel balances for my single-hung, tilting windows. The channel balance is stamped 34D and measures 34" x 1/2" x 1/2". I can see balances that look the same, but the pivot ends look very different from ours. Can you help? I will need two of this size bala ... (cont.)

Here is what I have. Any help would be greatly appreciated!!! I have a window counter balance that has gone bad. It says 34D BSI (I think that is what it says BSI). The roll formed metal is 1/2" x 1/2" x 34" in length. The I have from you is 9/16" x 9/16" x 34" and is much larger. I can send yo ... (cont.)