Viewing all customer Discussions for:

S770-20 20" Series 770 Balance

I need a 20" Series 770 balance. My window sash has an F stamp but your catalog only goes to E. Can you get it for me. I need 2.

My balance is stamped with BSI 20E It is exactly 1/2 inch square and exactly 20 inches long. I need at least four of these kits Picture WS1 is the locking terminal. Doesn't have to be an exact replacement. I just need something that will fit in my window and function correctly.

Hi, I have a broken window balance on the top sash of a double hung window. Sash weight is 21 lbs. I was surprised to find out that the left balance is a 19-D-40 and the right balance is a 19-E-50. This window was made by ORAN in Ontario, Canada. They are out of business now. I found replacements on ... (cont.)

Has 20B ESI stamped on one end. 20" long. The attached pics are from the good one but the other is trashed. Please advise on part no. I need to order.

Hi,I need to replace the channel balances but don't see an exact match. The size is 20 inches length, 1/2 wide, 1/2 depth. They are screwed directly into the window frame at the top. I sent several photos from different angles.I should add there are no markings or numbers anywhere. And here is a ... (cont.)

I need two window balance rods for pivot windows. They are 20 inches in length and the pivot shoe/wedge looks to be 1 1/4" in the channel.

I am looking to order (2) of the S770-20 channel balances with a 15-170 shoe attached. The balances are stamped with a 20B. Please let me know if you'll need any other information from me.

The window frame has order sticker: 21111-06 7120DH. 09/03/02 UBC Menomonie Cust: The metal sleeve containing pulley system is 20" with a stamp 20E

Hello I need replacement parts for two windows. so total of 4 parts I need for 2 windows. Length of the metal is 20 inch. Hope pics are clear enough.

Need 2 20" metal channel 19 9 E04T CMC

Hi this is MichaelI have 2 different size balances that I need to know which ones to orderOne is marked 2801The other is marked 2000Thanks

Looking for a channel balance as shown in photo.20" channel balance for a PGT series 2200 single hung window.Just to clarify, the PGT window is a tilt out window for easier outside pane cleaning. The only stamp I see on the metal channel is "20D". Plus, a smaller stamp next to it that is "BSI" and a ... (cont.)

I am looking to replace both the window balance and the tilt lock shoes that match up with these. The windows are a double pane, double hung vinyl window that could be the original windows from when the house was built in 1994. I don't know the history of them. This window measures 47" x 47" for the ... (cont.)

I need assistance in identifying the channel balance shown in the photos. I believe it is a Series 770 balance (Item # S770-20). However, the number stamped on the balance is 19TGX. Can you tell from this information whether it is a 20A, 20B, 20C, or 20E? Thank you Harold

do you know what size rivet or part number I should ordered to fit in the top hole of the balancer so the s hook gets installed on?

I have a channel balance that looks like the series 770 but instead of the white plastic clip in the end of the channel there is another rivet. The # stamped on it is 20B and it is white. Is there a balance that you have with the two rivets? Thanks

Have a couple windows in house with broke springs. Took one out and got an image of the side stamp. Which one do I need off your site. Thanks

I am looking for replacement balancers for a single hung door, Unique 15-D-40, and 19-D-40. I have some other pictures to help identify the balancer needed for replacement. Please help me find which one of the balancer can work on this window as replacement.

HI, as I searched for replacement parts for the "Unique" balances, your site came up. Time to rebuild these non-working windows, so I am attaching a few pictures. Off-hand I want 8 of the 19-B-20 and 2 of the 23-C-30 plus 4-6 pivot pins. Do the new balances have the 1-1/4" slide assembly fo ... (cont.)