Viewing all customer Discussions for:

S770-24 24" Series 770 Balance

Stamping on part is 23HD. Length: 24"; cross section is approximately 9/16" sq. The pictures show both ends of the removed balance that has a broken shoe and a picture of the other balance that is installed to show the full profile of the unbroken shoe.

Need 12 balancers i replaced some with the new ones you see ,need 12 more .

window balances have failed. Top has a z shaped hook formed from sheet metal that clips to top rivet on balance and uses final fold in metal to hold hook on the rivet. 22F and 24F stamped on metal.I don't know if there is a better solution to trying to find exact replacement parts. Here's what I fo ... (cont.)

The spring came loose and the pulley string clip detached from the track mechanism so the window doesn't open evenly nor stay up.

Hi, I am looking for this 24" channel balance .. very close to the 775 but the weight says 23HD and that is not an option. Any suggestions?

Hi, Customer Service I am looking for this Window Channel Balance L24" W 9/16 D 1/2 (not 5/8) I will appreciate your help PA

I need 12 sash balances and 20 screen frame retainers. I see that I have exceeded the max number of pics. I'll send screen hardware pics in a separate email.

Hi, I'm looking for replacement parts for the channel balance for my sash windows. I unfortunately don't know who put in the original windows/channel balances but from your website, it looks very similar to some of the models you have. I have measured the metal stems to be 24" long. One of the balan ... (cont.)

Have 24 inch square block and tackle balance, that hangs from hooks. Need both left and right sides

I see pat fend 2330. 3.6.i he on the rod

Hello. I have windows that are ~20 years old and the spring balances are starting to break. The markings on various windows around the house are 24c, 24d, and 32d. Based on my review of the information on your web site, it appears that I should select the Series 770 channel balance and the 15- ... (cont.)

4610108 will also need a balance. Replacement parts Will need 22 and 24 inch balance. Thank you

2400 BSI

From the website it looks like series 770 would work.My 4 windows that need to be fixed weigh between 18 and 19lbs. They will also need clips and shoes.

The tackle balance has a numbers on it. 24C (198 orB61)TK it is 24 inches long with a hook on the top spring side. The opposite side has a small metal piece that is tied on to a line and-connects to the tIlt block. I would need two tilt blocks and one tackle balance. Thank you.

COULD WE PLEASE HAVE SOME HELP RESEARCHING A BALANCE IT SEEMS TO BE S770-24 W. A 62-105 BOTTOM HOOK

Some of my windows will no longer stay up by themselves. When I took the window apart these were the parts. I also have 2 window that the top drops down and will not stay up where they belong.

HI, I require 8 window balance for my bonneville tilt wood windows. Can you adivse what size you have form them? It is 25 inch long, 9/16in depth, and 9/16th width. It also has a knife shoe stop that hopefully you can see in the pictures. Apologies for my feet in a couple pictures. Thank you fo ... (cont.)

I am looking for a new channel balance for a tilt double hung window. Please see attached photos of the broken balance and other associated parts. The balance is 24 inches long, weight category 24C, 9/16" wide and 1/2" deep. Per 'Swisco Customer Questions & Answers', I think I need a solution si ... (cont.)

The balance has marking 240 BSI. it is 24 inches long, 1/2 wide, 1/2 deep.The shoes in the photo are broken on top so I am not sure what that should look like. I need to order 6 balances and 6 shoes. Also 2 latches that are similar to photo.the shoe measurements are1 1/4 wide1 1/4 height1/2 deepPivo ... (cont.)