Viewing all customer Discussions for:

S170-409 409 Series 170 Coiled Balance Spring

Can you please recommend the parts needed to replace the parts shown in the photos? Thanks!

I am looking for quite a few of the pivot bars, receivers and coil springs

S170 Sash Weight: 18.5 Coil Stamp: Quantity: 2

I need to order the complete assembly and the pair of pivot bars for my double hung top sash. Can you assist me in making sure I order the complete assemblies for right and left sides of the top sash?The windows in my house are all certainteed I had installed when I built the house some years ago. T ... (cont.)

One of the coil balance springs in my CertainTeed double hung windows failed, and I need the parts to completely replace the assemblies on both sides. The pivot shoe and the coil springs are the only parts with numbers - A186160 for the pivot shoe, RA409 for the inner coil spring and LA407 for the ... (cont.)

Number 409 is stamped on the spring

Could you please help me to find correct stamp on swisco 170 in picture? I believe it is swisco 170 coil balancer. The weigh of window sash with glass is 18.8lbs. Thank you in advance.

Hello, I'm trying to find replacement parts for a CertainTeed window that we have that won't stay up unless we hold it. Our guess is that the coil and springs are broken. We've removed them from both sides of the window and included pictures of the hardware in question. Our issue is that we can't fi ... (cont.)

Hello, I need help with ordering the correct coil spring for this window brand. The pivot shoe is #15-192 but I am not sure about the coil. Mine is stamped 409. This unit is about 54" tall and 32 wide. I have units that are only 30" tall. Will that coil be the same?

Please see the attached pictures. I cannot get the shoe out without breaking the metal post on that rest in the shoe. The picture above of the balance support has a number of H65 34/5M and the coil I think has a 10 with a J underneath. We believe the shoe is A1-87598.

I have removed a fixed point part it is 1.25" wide and holds the coil. The coil is 3/4" wide. The coils are broken. There is no stamp on the coil The toe hold piece appears to move up and down the channel. The toe piece appears to be corroded as the part and window will not pop out like shown on the ... (cont.)

The windows are PlyGem CertainTeed. The label reads June5,2008 1104380940011800000. I have ordered 409 series 170 coiled balance springs from you in the past for these windows. I had a representative from Ply Gem Windows look at them, and although the parts will not be covered under the warranty, ... (cont.)

The photo shows the number on the bottom sash but I haven't been able to get a good picture of the strip on the upper sash. They appear to be the same tag this one showing bottom but the top tag again appears to be the same. This window won't stay up and I have had to cut dowel rods to keep it clo ... (cont.)

I am at your website and noticed Certainteed sash pivot bar part number 26?353. This looks like the one identical to my picture? Do you have the Certainteed window lock assembly like the one shown in the picture looks like part of the lock fits in that groove in the sash. Do you have the Certainte ... (cont.)

Can you please let me know which coil I should order for A186160 balance? The window sash weighs 19 lbs, and there is a "10" stamp on the broken coil. Thanks!

The markings say 409 j

Pivot shoe broke. The Both coils have 408 on them. Do I need a whole need balance assembly?

Hi. I am in need of some parts for my simonson windows. The part in question is the nylon piece which attaches to the spring that holds the window. The only identifier on the part is the number 409. I have included pictures. Is this a part you carry? Thanks, Brett

Good morning. I ordered the S170-263, but it was not the right fit for our windows. The attached photo are the two that we need.

The S170-409 is the closest part I could find on your website. The photo and dimensions match perfectly, however, my springs are stamped 410 vs 409. Actually they are stamped 410 and SK underneath that number. If the 410 is not available perhaps the 409 would work. Thank you