Viewing all customer Discussions for:

36-078 Shoe Stud

Truth part. Awning arm, 11", Track 25 7/8" without tabs, 26 7/8" with screw tabs. Current pivots at end of arms removable. Need long track. Other photo is of the window sash seal that imbeds into bottom sash that abuts the sill. Please advise on replacement parts. Thank you.

I am looking for a replacement crank Assembly for my window. Part number truth 45142, or a comparable part. I have attached a picture.

Looking for replacement for this awning operator.

Hello! I saw a very helpful Swisco video about replacing this part. I have an awning window in my bathroom that will not close. When I would turn the crank, nothing would happen. It's difficult to determine what size dual arm crank I need to use. Also, when I took out the screen, I could see that ma ... (cont.)

looking for metal clips that hold the shoe stud to the operator arm on a marvin awning made around 1998-2000

Will your part work?

I think I need the 39-365. Does it come in the color of the attached photo?

Looking for replacements. They have the inscription Truth on them

Hi I have a casement awning style window from 1993 on a second story. The handle appears to be stripped and will no longer allow the window to be cranked opened or closed. I do not know the brand and I haven't been able to locate any numbers or markings. Do you sell a handle unit that might work? ... (cont.)

Need to order not sure of part number. It is a church opener. Has 4 screw hold hidden under sill Have handle

My awning window has 2 "bars" that slide along a stable track on the window. The problem part is the right side bar where it becomes disconnected at the elbow hinge and then the window doesn't close all the way. I am guestimating each bar is approx 11 inches but it goes into the frame on the buildin ... (cont.)

I was looking at the Swisco product code 39-312 but I also need the slide shoe that goes in the tract as one of them is missing. I could not tell from the picture if this slider shoe is included. If not can a part # for this be identified

(Truth)was stamp on arm

Hello i was wondering if u carry this piece that screws on to the window crank handle helps open window by helping turn gears inside to open window, not sure the name but its missing from my window. Please see picture i attached the hole diameter thread is about 11/16". The handle brand is a weather ... (cont.)

Have 20 year old Marvin awning window in the garage that the crank shaft snapped off. The arm is 9 1/2" from center of arm pivot to the center of the gear. The top set of screw holes are 3" on center. This is a Trust operator with the number 45251 stamped on the bottom. I have found a couple of o ... (cont.)

This is an old awning window The mechanism is 5 inches wide The length of the arms is11 inches

I am looking for the casement hardware for these windows (I believe it is K and K hardware). Do you carry this piece? I couldn't read any numbers due to rust. Thanks

This is an anderson awning window and the crank operator is broken. I can still open/close the window when I turn the gear by hand but am unable to get the gear to turn by using the handle. Any idea on replacement parts that may work? Thank you in advance!

I have THRUTH awning windows that came with my house. One of the boot ends that holds the bar to the window broke. Any idea where I can get replacements?

What do you think?